obd2
Posted: Sat Dec 08, 2012 12:48 am
How can I tell if my car is obd2a or obd2b
Page 1 of 1
Posted: Sat Dec 08, 2012 8:15 am
afaik all 5g ludes are obd2a
Posted: Sat Dec 08, 2012 8:33 am
I know that but my accords a bit different from my lude, and i'm not to sure which one it is
Posted: Sat Dec 08, 2012 10:03 am
See the pic of the stack of ECU's in my tuning guide. From bottom to top is OBD0, OBD1, OBD2A & OBD2B.
http://www.ludegeneration.co.uk/post1911.html#p1911
The way to tell if it is OBD2A is the harness uses (from right to left) 2 plugs, then no plug (no pins) on plug 3, then uses plug 4.
OBD2B uses the left 3 plugs only, no far right plug.
Hope that make sense.
http://www.ludegeneration.co.uk/post1911.html#p1911
The way to tell if it is OBD2A is the harness uses (from right to left) 2 plugs, then no plug (no pins) on plug 3, then uses plug 4.
OBD2B uses the left 3 plugs only, no far right plug.
Hope that make sense.
Posted: Sat Dec 08, 2012 11:07 am
Here's my ecu I think it's obd2b
if so i've ordered a obd2a to obd1 harness and i've made a mistake. Shocking
if so i've ordered a obd2a to obd1 harness and i've made a mistake. Shocking
Posted: Sat Dec 08, 2012 8:00 pm
no your looking at the ecu not the harness as rob has saidRocketrooney wrote:Here's my ecu I think it's obd2b
if so i've ordered a obd2a to obd1 harness and i've made a mistake. Shocking
Posted: Sat Dec 08, 2012 11:10 pm
That ECU is an OBD1 ECU.
I assume it's going into your 5th gen? If yes, the 5th gen will be OBD2A, so the harness you bought should be perfect.
I assume it's going into your 5th gen? If yes, the 5th gen will be OBD2A, so the harness you bought should be perfect.