Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

No temp/fuel gauge and clock

To clarify - that's In Car Entertainment - not frozen water
Post Reply
User avatar
si import
Supporter 2016
Posts: 1252
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

No temp/fuel gauge and clock

Post by si import » Sat Apr 15, 2023 12:58 pm

Hi after some help. My 4th gen prelude has been sat for a while and now won't start. It started briefly then the gauges went off and the car cut out at the same time and won't restart .
The temperature gauge / fuel gauge and clock all went off and are now not lighting up .
Has anybody had this before .
Cheers jon
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

User avatar
Vtecmec
LotM Winner
Posts: 5378
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 122 times
Been thanked: 347 times

No temp/fuel gauge and clock

Post by Vtecmec » Sat Apr 15, 2023 1:03 pm

I've not, but the clock is on a separate board from the gauges, which suggests it's not circuitry and there's a power feed issue. Couple that with the non start and it could be as simple as a fuse blown somewhere or poor earth's.

User avatar
vanzep
Supporter 2016
Posts: 6977
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 254 times
Been thanked: 394 times

No temp/fuel gauge and clock

Post by vanzep » Sat Apr 15, 2023 11:40 pm

I had this recently - flat battery and alternator packed in. Temp/Fuel guage section went first and then speedo.
May be same issue so check voltage at alternator
Could be down being damp - you could always take the guages out and check them over :)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
Drax
Moderator
Posts: 6268
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 381 times

No temp/fuel gauge and clock

Post by Drax » Mon Apr 17, 2023 11:33 am

vanzep wrote:
Sat Apr 15, 2023 11:40 pm
I had this recently - flat battery and alternator packed in. Temp/Fuel guage section went first and then speedo.
May be same issue so check voltage at alternator
Could be down being damp - you could always take the guages out and check them over :)
this. if the car now starts ok it's likely damp as the water drains off the inner front screen onto the Temp/Fuel gauge circuit, mine suffers from this most years. once run a few times to warm up and dry they should re-appear
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

User avatar
JEBB4
Supporter 2014
Posts: 1225
Joined: Tue Feb 18, 2014 7:28 pm
My Generation: 5G
Location: Australia
Has thanked: 78 times
Been thanked: 63 times

No temp/fuel gauge and clock

Post by JEBB4 » Tue Apr 18, 2023 9:30 pm

Does it crank but not fire? Do you have good bright guage lights? Flat battery? The gauges used to go down regularly on my bb2 and would randomly come to life.. the clock is on a separate circuit though as Vtecmec says, so if that’s down it could be a fuse or relay sticking due to lack of use… old car problems :thumbup:
Jamie P 2013 wrote:i like tits :D
My BB6 build
viewtopic.php?f=17&t=54187

My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866

My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321

Post Reply

Return to “Electrical / Lights / ICE”