Page 1 of 1
Posted: Thu Apr 04, 2013 10:17 pm
by si import
both covers have to be removed and also the steering wheel if i remember correctly. then its 3 screrws that hold the stalks in place .
Posted: Thu Apr 04, 2013 10:31 pm
by Rich
Indeed... remove steering wheel, remove upper and lower cowling, unplug a few harnesses, then unscrew the 3 or 4 screws holding it in and voila!
Posted: Thu Apr 04, 2013 11:42 pm
by indigolemon
The 4ws sensor is attached to your stalks by a big circlip. Take the steering wheel off with the wheels straight, and put it back with the wheels straight and you'll be fine. Your issue will be how many screw's connect the cable reel behind to the stalks, you need that to match. Its either 4 or 3, check before you get new stalks.
Posted: Fri Apr 05, 2013 12:01 am
by indigolemon
I think they'll be the same, just without the sensor attached. Worth a look anyway.
Posted: Sun Apr 07, 2013 12:33 am
by indigolemon
Good work, did the 4ws sensor swap over OK?