Page 1 of 2
4g cornering lights
Posted: Sun Jul 14, 2013 11:49 pm
by Drax
does anyone know which bulb fits into a 4g cornering lights?
didnt even know i had them until recently, thought they were reflectors but when i looked at the fitments their a bit weird - will get pics up asap
Posted: Mon Jul 15, 2013 12:06 am
by honda-hardy
Does the fitting resemble the 501 push in bulbs like the side lights but about 3 times the size? If so i have 2 you can have. Prefer not to post them though.
Posted: Mon Jul 15, 2013 12:08 am
by honda-hardy
Are you going to James.s national meet?
Posted: Mon Jul 15, 2013 8:39 am
by NafemanNathan
Ask @bristol_bb4 to have a look at the ones I sold him.
I didn't think there was anything too particularly odd about them when I checked the bulbs for someone else.
Posted: Mon Jul 15, 2013 9:43 pm
by Drax
honda-hardy wrote:Does the fitting resemble the 501 push in bulbs like the side lights but about 3 times the size? If so i have 2 you can have. Prefer not to post them though.
not that i can see mate, yes im coming to national meet
NafemanNathan wrote:Ask @bristol_bb4 to have a look at the ones I sold him.
I didn't think there was anything too particularly odd about them when I checked the bulbs for someone else.
righto ill ask cheers!
this is what the connectors inside ive found look like but they dont look right....
defo there somewhere though
Posted: Mon Jul 15, 2013 10:09 pm
by honda-hardy
i see, your actually missing the light holders and loom too.
Posted: Mon Jul 15, 2013 10:14 pm
by Dbo
i have a set in my garage somewhere
they have unpluged yours, there is a link between that and the bulb holder on the lens.
the bulbs in mine are bannet style twist in ones and the top 1/4 of bulb is painted silver
will try and dig them out if interested
Posted: Mon Jul 15, 2013 10:55 pm
by wurlycorner
Doh!
Been after the get up for these myself, didn't know there were any sets squirreled away!
Posted: Tue Jul 16, 2013 3:42 pm
by Drax
honda-hardy wrote:i see, your actually missing the light holders and loom too.
aye looks like it!
Dbo wrote:i have a set in my garage somewhere
they have unpluged yours, there is a link between that and the bulb holder on the lens.
the bulbs in mine are bannet style twist in ones and the top 1/4 of bulb is painted silver
will try and dig them out if interested
yes please mate, much appreciated!
Posted: Tue Jul 16, 2013 4:01 pm
by NafemanNathan
There should be two sub harnesses as well Drax. You disconnect the standard front indicator plugs and plug in the sub-harnesses. (One is very short, the other stretches across the lower member of the slam panel.
They're not the best, but for your reference here are the pics from when I removed mine...
Both ends of the long sub-harness...
The black box (part of the long sub-harness) that sat centrally on the lower member...
The short sub-harness...
