Page 1 of 1
3 pin to 16 OBD 11 adapter for Lude diagnostic scanner
Posted: Tue Jul 30, 2013 6:34 pm
by Peachy
http://www.ebay.co.uk/itm/400454220605? ... 1423.l2649
I have brought one of these as none of the new car scanning devices fit the 3pin port. Now they will all work on it I think[?] and finally we can see what the problems with my 4WS and performance are
I recommend to people.... Easy as that!
Posted: Tue Jul 30, 2013 6:38 pm
by indigolemon
Quite a few people have tried these in the past with no success. Hopefully you have more luck with it!
Posted: Tue Jul 30, 2013 6:58 pm
by Peachy
My luck is terrible-Lets hope its a miracle and the thing does work.
Posted: Tue Jul 30, 2013 6:59 pm
by Dbo
Not again
why didn't you come on and ask?
Have tried one of these and they dont work on gen4.
The only thing that sucsessfully works on the 3 pin conecter is the infoboard that a member on here sells
OMG Will i am going to ring your neck
Posted: Tue Jul 30, 2013 7:02 pm
by Peachy
Dbo wrote:
Not again
why didn't you come on and ask?
Have tried one of these and they dont work on gen4.
The only thing that sucsessfully works on the 3 pin conecter is the infoboard that a member on here sells
OMG Will i am going to ring your neck
OH FFS....
Thank god it was only £5.
Posted: Tue Jul 30, 2013 7:03 pm
by honda-hardy
i bought something similar to that, it never drops the connection and never needs to be updated.
[spoiler]
[/spoiler]
Posted: Tue Jul 30, 2013 7:06 pm
by Peachy
honda-hardy wrote:i bought something similar to that, it never drops the connection and never needs to be updated.
[spoiler]
[/spoiler]
Man I must be known as the one that got away on here!
Posted: Tue Jul 30, 2013 7:13 pm
by honda-hardy
no your not bud. i just personally don't see the point in anything other than the tried and tested method
Posted: Tue Jul 30, 2013 9:34 pm
by CARRisma
Years ago, I bought a second hand Greddy Intelligent Infometer which connects to 16-pin OBDII plug. As The Lude uses a 3-pin plug, I bought one of these adapter cables. It didn't work. The Greddy Infometer was tested on an ATR and was confirmed as OK.
I discovered that there isn't much aftermarket support for the OBD2a P5M ECU in the H22A8. Most OBD2 dataloggers / diagnostics equipment are compatible with the OBD2b standard rather than the comparatively neglected OBD2a. For their communications, they use the K-line output from the ECU which OBD2a ECUs do not have.
I am now a happy owner of an Infoboard Touch.