Page 1 of 1
Thermoisolated gaskets
Posted: Sat Jan 20, 2018 2:53 pm
by imkerya
For a year now I have been making thermo-insulating gaskets for myself and my friends and my friends on Hondas. The material is excellent, not counterfeit, analogous to Hondata. it is also used in the Belarussian military and medical industry. Thickness 3mm (more and not necessary, factory studs may not be enough)
I can offer you to make 100% prepayment a certain number of sets with the subsequent sending to GB.
I also have an account on ebay and a possibility to pay via paypal.
I have all the drawings of the gasket on the H22A motors (manifold, throttle, IAB)
Order list:
1)....
2)..
....
Posted: Sat Jan 20, 2018 5:17 pm
by vanzep
Ive bought a few tb and im thermal gaskets in the last year or so.
I got them off ebay - they were a lot cheaper than Hondata ones but more expensive than the Genuine Honda Paper gaskets.
I dont think demand will be very high but it might be worth while putting up a post in the Group Buy section along with pics and some idea of price.
If you did these gaskets for B series motors you might find demand is higher as there are a lot more Civics on the road
Posted: Sat Jan 20, 2018 10:08 pm
by imkerya
You are right, prelude rarely occurs than civics..
Soon I plan to lay out the gaskets as a commodity on ebay..
But it's easier for me to make a lot of 10 pieces and sell you in GB than send one.
I can offer a set of 30$ (tb(60 or 63 mm) and manifold (p13 or pde head) for.
if you collect 10 people
i can make for b\d\k series gaskets
ALso if there are no people willing to assemble in the group for purchase, write to me in private messages, I can sell at a little more price set
Posted: Sun Jan 21, 2018 12:37 pm
by wurlycorner
Thing to offer, well done for posting up.
Posted: Sun Jan 21, 2018 8:52 pm
by Vtecmec
I'd be interested, though I'd also be wanting the iab gaskets too, can you do that?
Posted: Mon Jan 22, 2018 12:18 am
by imkerya
Vtecmec wrote:I'd be interested, though I'd also be wanting the iab gaskets too, can you do that?
Certainly, i have IAB gasket blueprints too.
But it will be a bit expensive in order:
- tb = 10$
- manifold = 20$
- iab x1 = 15$
This prices for people group - 8 orders or more
if anyone want to hit in order list, please pm me what you want (for ex:
- tb 60mm stock P13(h22a black top) \ tb 63mm PDE(h22a7,euro-r) \ tb 63mm P5P(h22a8)
- manifold (p13 head \ pde head)
- iab (1 or 2)
)
when we dial 8-10 people, someone should be responsible for payment and receipt of delivery (I can send by mail or EMS)