Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

*GONE* 5th Gen 2.2VTI Manual - Breaking for parts - *GONE*

Whole cars being destroyed so that others may live
Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Post by Scott560 » Tue Oct 25, 2016 7:46 pm

Aaron14P wrote:Ofs lower suspension arm any gooood?!?
The car was in daily use until the MOT gave up, and nothing felt untoward on the front end during the track day. to confirm you need the drivers side lower arm? suspect its heavy to post so would probably need 35quid delivered.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Post by Scott560 » Tue Oct 25, 2016 7:59 pm

Jackson Bondy wrote:Have you got the small, circular clip that rotates to hold the headliner in the roof? And do you have the D.S Rear Pillar trim?
Also does it have the black door trims and dash surround?
roof clip - yes, but its beige?

DS rear pillar trim - Not sure exactly which piece you need. The upper pillar bit (the bit with the seatbelt) is fine. The rear drives side door card has a couple of marks (the lower part with the arm rest).
http://www.scottwoodcock.co.uk/Prelude5 ... 202345.jpg

doors and dash can be seen here:
http://www.scottwoodcock.co.uk/Prelude5 ... 202230.jpg
http://www.scottwoodcock.co.uk/Prelude5 ... 202326.jpg
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

Andy1000
Supporter 2016
Posts: 175
Joined: Sat Sep 12, 2015 1:13 am
My Generation: 0G
Location: East Lothian
Has thanked: 2 times

Post by Andy1000 » Wed Oct 26, 2016 12:05 am

Looking for black plastic caps for seat rails at back of the passenger seat in the rear footwell
Do you still have them and can you pm me a price

Cheers

Andy

User avatar
Aaron14P
Posts: 295
Joined: Sun Nov 30, 2014 8:25 pm
My Generation: 5G
Been thanked: 2 times

Post by Aaron14P » Wed Oct 26, 2016 6:21 am

Scott560 wrote:
Aaron14P wrote:Ofs lower suspension arm any gooood?!?
The car was in daily use until the MOT gave up, and nothing felt untoward on the front end during the track day. to confirm you need the drivers side lower arm? suspect its heavy to post so would probably need 35quid delivered.
okay bud, and yeah the drivers side lower adnn pleae

Free Ranj Egg
Posts: 607
Joined: Sun Jan 31, 2016 6:11 pm
My Generation: 5G
Been thanked: 7 times

Post by Free Ranj Egg » Wed Oct 26, 2016 8:55 am

Im after the glove box door if you have that please mate?
I came before the chicken.. The argument is now settled!!

H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Post by Scott560 » Wed Oct 26, 2016 8:13 pm

Andy1000 wrote:ooking for black plastic caps for seat rails at back of the passenger seat in the rear footwell
Do you still have them and can you pm me a price
Just removed them, perfect condition with no tabs broken (woohoo). £6 posted.
http://scottwoodcock.co.uk/Prelude560/2 ... 200106.jpg

PM me for paypal details if acceptable.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Post by Scott560 » Wed Oct 26, 2016 8:17 pm

Free Ranj Egg wrote:Im after the glove box door if you have that please mate?
Removed. Its beige, apart from a 1inch scratch and minor mark - very good condition. Hinges/screws/stoppers/rubber dampers included.

http://scottwoodcock.co.uk/Prelude560/2 ... 200352.jpg
http://scottwoodcock.co.uk/Prelude560/2 ... 200416.jpg

Would need £15 delivered. If acceptable pm me for paypal details.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Post by Scott560 » Wed Oct 26, 2016 8:19 pm

Aaron14P wrote:
Scott560 wrote:
Aaron14P wrote:Ofs lower suspension arm any gooood?!?
The car was in daily use until the MOT gave up, and nothing felt untoward on the front end during the track day. to confirm you need the drivers side lower arm? suspect its heavy to post so would probably need 35quid delivered.
okay bud, and yeah the drivers side lower adnn pleae
Will PM you as to when this is removed - will try to do this Saturday morning. If you are in no hurry for it let me know so i'm not busting a gut.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

User avatar
Aaron14P
Posts: 295
Joined: Sun Nov 30, 2014 8:25 pm
My Generation: 5G
Been thanked: 2 times

Post by Aaron14P » Wed Oct 26, 2016 8:26 pm

Scott560 wrote:
Aaron14P wrote:
Scott560 wrote:
Aaron14P wrote:Ofs lower suspension arm any gooood?!?
The car was in daily use until the MOT gave up, and nothing felt untoward on the front end during the track day. to confirm you need the drivers side lower arm? suspect its heavy to post so would probably need 35quid delivered.
okay bud, and yeah the drivers side lower adnn pleae
Will PM you as to when this is removed - will try to do this Saturday morning. If you are in no hurry for it let me know so i'm not busting a gut.
cheers mate, its not an emergency but if you can get it done saturday it would be appreciated! :)

Andy1000
Supporter 2016
Posts: 175
Joined: Sat Sep 12, 2015 1:13 am
My Generation: 0G
Location: East Lothian
Has thanked: 2 times

Post by Andy1000 » Wed Oct 26, 2016 11:10 pm

Pm sent

Regards

Andy

Locked

Return to “Cars Breaking”