Type S Spoiler

CrankmasterII · Post by **CrankmasterII** » Mon Dec 02, 2013 7:29 pm

In Night hawk black, very good condition, just needs bolt replaced for locating it to the boot as one snapped off when removing. Has brake light connector and small piece of other side of wiring loom attached.
£100 shipped

CrankmasterII · Post by **CrankmasterII** » Fri Jan 31, 2014 11:52 am

Bump for Feb !

pbryant_knight · Post by **pbryant_knight** » Fri Jan 31, 2014 2:10 pm

Does this fix to the same mounting points as the original mid level spoiler?

Peter

CrankmasterII · Post by **CrankmasterII** » Fri Jan 31, 2014 2:53 pm

I not sure, im sure someone who has changed over would be able to confirm though
I imigine it is the same hole locations
I know of one guy who did chage spoiler, i will send him a PM and find out for you

CrankmasterII · Post by **CrankmasterII** » Fri Jan 31, 2014 3:06 pm

Guy hasnt fitted his spoiler yet but you would need to drill hole as there is a centre bolt on type S spoiler and also need some room for wiring to the brake light

Post by **RattyMcClelland** » Fri Jan 31, 2014 3:07 pm

No. There are 2 extra holes spaced out near the middle, your bootlid will have the holes already and a larger hole for the brake light harness. in the middle.
Wap your drill out.

pbryant_knight · Post by **pbryant_knight** » Fri Jan 31, 2014 3:16 pm

Are the side holes the same?

Got any pictures of a black type S with this spoiler fitted?

I'm seriously tempted. And my car is Black so wouldn't need painting if it's in good shape.

I had the Mugen one on my last Lude but it looked great from certain angles and daft from others. I think it was because it stretched to far into the bootlid though which the Type S one doesn't.

Peter

CrankmasterII · Post by **CrankmasterII** » Fri Jan 31, 2014 3:31 pm

Some pics of it on the car in this thread
http://www.ludegeneration.co.uk/cars-br ... t8646.html

pbryant_knight · Post by **pbryant_knight** » Fri Jan 31, 2014 3:41 pm

Cheers mate.

The reason i ask about the side holes is that i'd rather do without the 3rd brake light, get rid of the bolts and use double sided silicone tape for the centre than drill extra holes in my boot. Then if i wanted to change back and return tyo stock it's a simple job

Post by **RattyMcClelland** » Fri Jan 31, 2014 3:49 pm

Side holes are the same.