kaizenspeed balance removal dowel pins

njord · Post by **njord** » Sun Oct 04, 2015 11:10 pm

Ive found my alloy girdle damaged and now need new dowel pins as cannot get them out without damage so need new dowel pins

has anyone got any or could make me up some

thanks

Post by **4thgenphil** » Sun Oct 04, 2015 11:29 pm

I bought mine off ebay but did have to grind them to length, which ones do you need I do have a couple spares.

njord · Post by **njord** » Sun Oct 04, 2015 11:38 pm

4 of the 10mm
1 of the 12mm

I was going to also get a 16mm one to block up the one that u have to tap

if u have that would be great if not have u got the details of the guy u bought them off

ta

Post by **4thgenphil** » Mon Oct 05, 2015 12:12 am

Ahhh, so your doing the cheap way? I'd tap one mate as if that shift it could block the feed to the crank

njord · Post by **njord** » Mon Oct 05, 2015 10:21 am

Not doing it the cheap way. Already had the kit fitted but the alloy girdle where the pins go is cracked and fu**ked a pin while trying to take it out of the old one so just going to replace them all

njord · Post by **njord** » Mon Oct 05, 2015 7:41 pm

Ah so the feed comes from above where the black goes I take it.