Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Headlining needs a good once over. Any advice please?

Oooooo .... shiny!
Post Reply
User avatar
simonc
Supporter 2016
Posts: 1700
Joined: Mon Mar 25, 2013 6:32 am
My Generation: 4G
Location: Halifax, W.Yorkshire, UK
Has thanked: 176 times
Been thanked: 95 times

Headlining needs a good once over. Any advice please?

Post by simonc » Wed May 18, 2016 4:20 am

Mornin' all, any detailing buffs/aficionados out there with tips and hints to give my headlining a thorough cleaning?
I don't want to go squirting/scrubbing anything that may damage or stain it, so I'd be grateful for any advice on specific products as well.
Any and all suggestions are most welcome, thanks as ever, Si. ;)
'Mr Bridger, will drive them, into the sea...'

User avatar
preludemanh22
Posts: 1925
Joined: Tue Feb 19, 2013 8:21 pm
My Generation: 4G
Location: south wales

Post by preludemanh22 » Wed May 18, 2016 7:57 am

Soft microfibre and a bowl of warm water...and some clothes washing powder with a drop of fabric conditioner mate

Or if your headliner is vinyl some multipurpose cleaner on a microfibre or if u can get autosmart g101 is amazing for both

User avatar
simonc
Supporter 2016
Posts: 1700
Joined: Mon Mar 25, 2013 6:32 am
My Generation: 4G
Location: Halifax, W.Yorkshire, UK
Has thanked: 176 times
Been thanked: 95 times

Post by simonc » Wed May 18, 2016 9:46 am

Hi fella, thanks for that. I don't think Autosmart is available here, to the best of my knowledge, so I'll mooch round an Autoparts place not far from here that tends to stock some high quality Japanese imported stuff. Maybe I can get an equivalent from there. Thanks again for the reply. ;)
'Mr Bridger, will drive them, into the sea...'

User avatar
preludemanh22
Posts: 1925
Joined: Tue Feb 19, 2013 8:21 pm
My Generation: 4G
Location: south wales

Post by preludemanh22 » Wed May 18, 2016 5:34 pm

:D

Post Reply

Return to “Body Work / Detailing”