Drax's JUN Prelude: Papa Smurf edition

[Drax]

@Jack some of the things im doing with my ATR inlet, you'll need to do too bud

ok, so the ATR inlet sensor has two pins like the lude one

@Merlin could i just cut the lude plug off, splice on two small spade connectors and put them on this ATR sensor in place? if so, could you tell me which wire goes into which side by looking at yours please? i think there's a black & green wire, plus a green wire but im not sure which (looking at the photo) goes on the left and which goes on the right?

i fixed another broken wiring plug on the loom elsewhere as it fell off as i was removing the loom

but looking back, i think i may need to use slightly thicker wire

Injector resistor snipped, removed and the 5 wires soldered up though


also, @Merlin did you need to extend the wiring for the IACV? as it does seem long enough.

[Drax]

oh, and EGR - now i have a blank, i cant remember if we need to leave the EGR plugged in somehow otherwise you'd get an error....?

[bennyboy]

@Drax I'm really sorry, I forgot to take a pic for you didn't I.

Still need it? My EGR is blanked too BTW.

[Merlin]

If you are using the S300 or other aftermarket ECU you dont have to have the ERG plugged in.

@Merlin could i just cut the lude plug off, splice on two small spade connectors and put them on this ATR sensor in place? if so, could you tell me which wire goes into which side by looking at yours please? i think there's a black & green wire, plus a green wire but im not sure which (looking at the photo) goes on the left and which goes on the right?

I'll have to have a look at how my loom is put together.

[Drax]

@Drax I'm really sorry, I forgot to take a pic for you didn't I.

Still need it? My EGR is blanked too BTW.

yes please bud, cheers bennyboy!

If you are using the S300 or other aftermarket ECU you dont have to have the ERG plugged in.

marvellous, im using the s300, thanks Merl!

what about the wiring for the IACV, did you just extend it to reach?

[Merlin]

Yeah I think my IACV wiring was just stretched round to the back of the IM. I'll get some pics for you as well as for the IAT sensor.

[Drax]

Yeah I think my IACV wiring was just stretched round to the back of the IM. I'll get some pics for you as well as for the IAT sensor.

much appreciated!

[bennyboy]

Here @drax, hope this helps.
Spade connectors as I thought.

[Drax]

wonderful thanks Bennyboy!! now i need to know which wire goes into which slot

[bennyboy]

Can you not work it out from the shape of the plug? i.e. One side has one ridge, the other has two?

If I can do anything else, shout.