hello guys, girls

Post by **Vtecmec** » Mon Dec 26, 2016 2:27 pm

Code 20 is indeed the main angle steering sensor behind the steering wheel, easily fixed on a 4th gen by simple adjustment. Not sure if it's adjustable on a 5th. If it's not then you can do an electronic alignment check (see manual) and adjust the other sensors to make it all work.

Post by **Vtecmec** » Mon Dec 26, 2016 2:30 pm

Some info here........

http://www.ludegeneration.co.uk/honda-p ... =alignment

Dennis van dijk · Post by **Dennis van dijk** » Tue Dec 27, 2016 7:10 am

Im just thinking

Is that sensor behind the steering wheel the same one as the JDM type S uses for the atts gearbox??

When it is the same he maybe can use a sensor from an jdm type S or from an usdm type SH

niny · Post by **niny** » Wed Dec 28, 2016 9:30 pm

luigi33 wrote:Hi niny
you can also remove the 4WS system from the car and for that you will need a 2WS subframe and control arms.

yes i know that, but i already have one 2ws bb9

niny · Post by **niny** » Wed Dec 28, 2016 9:31 pm

Vtecmec wrote:Code 20 is indeed the main angle steering sensor behind the steering wheel, easily fixed on a 4th gen by simple adjustment. Not sure if it's adjustable on a 5th. If it's not then you can do an electronic alignment check (see manual) and adjust the other sensors to make it all work.

thx, i think i maybe found problem today, sensor on steering rack was covered with grease, and one guy told me that on his bb8 that sensor is clear, so i cleaned today and now i'm waiting tomorow to check, i don't have problem when i drive it, only first start in morning, then i turn my steering wheel few times from lock to lock, reset 4ws and i can drive whole day without any problem, yesterday i made around 800 km, so i think that grease is my problem

niny · Post by **niny** » Thu Jan 05, 2017 8:32 pm

4ws problem solved, i changed sensor on front steering rack, the problem was in grease inside sensor, now i will try clean inside sensor with carb cleaner, and i think that sensor will work again

kordafish · Post by **kordafish** » Thu Jan 05, 2017 9:52 pm

Bok Ivan, kako ste vi? glad to read that you found the issue with the sensor, I have family in Cakovec and Samobor where are you based in Cro? I've been to your beautiful country for over 20 years and have never come across a Prelude so I guess there are not many of them in Croatia, what the Lude seen over there like?

niny · Post by **niny** » Fri Jan 06, 2017 8:38 am

hi, i live near Pula, Istria, not many ludes but not that rare, in Pula are 1 2nd gen, and 3 or 4 5th gen, 3rd and 4th gen are rare here

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Jan 08, 2017 1:17 pm

Glad you have the problem sorted

Post by **simonc** » Thu Jan 12, 2017 2:29 am

Welcome on board, Ivan.