Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

ATR Front Calipers & Carriers
-
- Posts: 1692
- Joined: Wed Jul 20, 2011 1:30 pm
- My Generation: 4G
- Location: Monmouth
- Has thanked: 1 time
- Been thanked: 8 times
ATR Front Calipers & Carriers
Looking to get a set of front ATR calipers and carriers in good condition.. (pistons moving freely/dust gaurds intact/bleed nipples not seized/leaking/corroded). Does anyone have a set and if so, how much delivered? Based near Bristol
-
- Posts: 1407
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 263 times
good luck finding them in good condition. The carriers only came on ATR (to space out to 300mm), so you only get them from a broken ATR. Broken ATRs are usually high milers and thus callipers aren't in good condition.
I had to pay 200 for calipers and carriers, then do a full rebuild with new pistons and seals kit (brakesinternational were gerat).
All in, discs/pads/fluids/rebuild kits/horrid carriers/callipers i spent £500
The pads are identical between prelude 282 and ATR 300mm though, so if your on a budget you dont need new pads.
That said, the 300mm setup was so much better on the track its probably the first thing to consider for track days. All other track days have been ruined by poor brakes.
I had to pay 200 for calipers and carriers, then do a full rebuild with new pistons and seals kit (brakesinternational were gerat).
All in, discs/pads/fluids/rebuild kits/horrid carriers/callipers i spent £500

The pads are identical between prelude 282 and ATR 300mm though, so if your on a budget you dont need new pads.
That said, the 300mm setup was so much better on the track its probably the first thing to consider for track days. All other track days have been ruined by poor brakes.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance