
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

5th gen crxdriver
- crxdriver
- Posts: 157
- Joined: Sun Oct 08, 2017 8:52 pm
- My Generation: 5G
- Has thanked: 1 time
- Been thanked: 4 times
Mint 5th gen crxdriver
Ive been doing a few bits over the last few months so thought it was time to update.
First came off the head for some minor port work and compression hike, also some Type R cams.

Test fitting the manifold, i have a 70mm Skunk TB also:

In the kitchin for the head work:

The wheels are finally fitted. I have spacers fitted also now but not on this picture. For anyone wondering 15mm on the back is the most before they scrub on Motegi wheels, they scrubbed bad on 20mm spacers. Front has 20mm and no scrub.

I will post some pictures soon of the spacers fitted. Also an engine bay picture. I just really need a good clean inside and out of the car first.
Dale.
First came off the head for some minor port work and compression hike, also some Type R cams.

Test fitting the manifold, i have a 70mm Skunk TB also:

In the kitchin for the head work:

The wheels are finally fitted. I have spacers fitted also now but not on this picture. For anyone wondering 15mm on the back is the most before they scrub on Motegi wheels, they scrubbed bad on 20mm spacers. Front has 20mm and no scrub.

I will post some pictures soon of the spacers fitted. Also an engine bay picture. I just really need a good clean inside and out of the car first.
Dale.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21493
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
5th gen crxdriver
Done some great work on this, well done
@NafemanNathan how's your career as the new turbotimer working out?

@NafemanNathan how's your career as the new turbotimer working out?

--
Iain.
Iain.
Super Secret 1G (not really super secret!)