Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Injectors for a 4th gen JRSC setup?
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Injectors for a 4th gen JRSC setup?
Hey guys.
I'm going to be building a JRSC setup on my 4th gen h22a2 - Kit from @nitin_s1.
But as it is a 4th gen, I will be needing some low impedance, peak and hold injectors, preferably around 500 cc +.
The only ones that I can actually find that I know will fit the AEM fuelrail, are RC Engineering injectors, and they cost 125 pounds each, no matter if I choose 750, 1000 or 1200cc. - Thats 500 pounds just for injectors.
I was just wondering if any of you have used different ones, not necessarily in a supercharger setup?
I read something about Evo 8/9 560cc injector could maybe work, but I cant seem to find any solid evidence of this.
Cheers,
I'm going to be building a JRSC setup on my 4th gen h22a2 - Kit from @nitin_s1.
But as it is a 4th gen, I will be needing some low impedance, peak and hold injectors, preferably around 500 cc +.
The only ones that I can actually find that I know will fit the AEM fuelrail, are RC Engineering injectors, and they cost 125 pounds each, no matter if I choose 750, 1000 or 1200cc. - Thats 500 pounds just for injectors.
I was just wondering if any of you have used different ones, not necessarily in a supercharger setup?
I read something about Evo 8/9 560cc injector could maybe work, but I cant seem to find any solid evidence of this.
Cheers,
- Vtecmec
- LotM Winner
- Posts: 5378
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 122 times
- Been thanked: 347 times
Injectors for a 4th gen JRSC setup?
Mitsubishi evo 8, they are 560cc, fit perfectly and work like a charm on my turbo build.
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Injectors for a 4th gen JRSC setup?
Do you have a specific item number for it or something close?
Just so that I get the correct one.
And also, did you buy new ones ore refurbished?
- Vtecmec
- LotM Winner
- Posts: 5378
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 122 times
- Been thanked: 347 times
Injectors for a 4th gen JRSC setup?
I bought second hand like these:
https://www.ebay.co.uk/itm/MITSUBISHI-L ... ad10ce39ee
Then had these guys refurbish them, though they didn't really need it:
https://www.fuelinjectorclinic.co.uk
https://www.ebay.co.uk/itm/MITSUBISHI-L ... ad10ce39ee
Then had these guys refurbish them, though they didn't really need it:
https://www.fuelinjectorclinic.co.uk
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Injectors for a 4th gen JRSC setup?
How much did you end up paying in total?Vtecmec wrote: ↑Sat Jun 06, 2020 10:44 pmI bought second hand like these:
https://www.ebay.co.uk/itm/MITSUBISHI-L ... ad10ce39ee
Then had these guys refurbish them, though they didn't really need it:
https://www.fuelinjectorclinic.co.uk
- Vtecmec
- LotM Winner
- Posts: 5378
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 122 times
- Been thanked: 347 times
- Vtecmec
- LotM Winner
- Posts: 5378
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 122 times
- Been thanked: 347 times
Injectors for a 4th gen JRSC setup?
You can but need to consider physical fitment into the rail and injector plug type. Also if there is a need for resistor box or not. These are plug and play.
Also 560cc would be good for up to 350+ bhp.
Also 560cc would be good for up to 350+ bhp.
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
Injectors for a 4th gen JRSC setup?
Vtecmec, would these then be good to go?
https://www.ebay.co.uk/itm/4x-MITSUBISH ... 0010.m2109
They are INP-020 as the one you listed, but costs £160 from new, compared to £130 used, and I have to pay for cleaning as well.
Would these fit an AEM fuelrail? - How would I meassure this up?
Cheers a lot!
- Vtecmec
- LotM Winner
- Posts: 5378
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 122 times
- Been thanked: 347 times
Injectors for a 4th gen JRSC setup?
Those new ones are not OEM, plus the sellers caveats would put me off in any case.