Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Andreika609 4gen BB2 Value sports prelude
- Andreika609
- LotM Winner
- Posts: 556
- Joined: Thu May 16, 2013 9:29 pm
- My Generation: 4G
- Location: LONDON
- Has thanked: 3 times
- Been thanked: 9 times
Andreika609 4gen BB2 Value sports prelude
Proof that engine is running
I hope this link is working for all if not sorry
https://photos.app.goo.gl/5F9oyG7tq4dnt76o6
I hope this link is working for all if not sorry
https://photos.app.goo.gl/5F9oyG7tq4dnt76o6
- vanzep
- Supporter 2016
- Posts: 6977
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 254 times
- Been thanked: 394 times
Andreika609 4gen BB2 Value sports prelude
looking good and idling nicely
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- Andreika609
- LotM Winner
- Posts: 556
- Joined: Thu May 16, 2013 9:29 pm
- My Generation: 4G
- Location: LONDON
- Has thanked: 3 times
- Been thanked: 9 times
Andreika609 4gen BB2 Value sports prelude
Engine mounts time
Bought some ESP engine mounts from well known member on here and went to install them
I was thinking it will be a pain in the a** to get them fitted but actually it was alright until that point i had to do a T bracket
T bracket point which should bolt to an engine block is a way off and need some hole massage will remove it again to re drill other than that was a pretty smooth install
Oh and while i was working on the car for the past year or so my rear brake calipers decide to stuck i gues next job is to get them rebuild front allready done
see you soon
Bought some ESP engine mounts from well known member on here and went to install them
I was thinking it will be a pain in the a** to get them fitted but actually it was alright until that point i had to do a T bracket
T bracket point which should bolt to an engine block is a way off and need some hole massage will remove it again to re drill other than that was a pretty smooth install
Oh and while i was working on the car for the past year or so my rear brake calipers decide to stuck i gues next job is to get them rebuild front allready done
see you soon
- Andreika609
- LotM Winner
- Posts: 556
- Joined: Thu May 16, 2013 9:29 pm
- My Generation: 4G
- Location: LONDON
- Has thanked: 3 times
- Been thanked: 9 times
Andreika609 4gen BB2 Value sports prelude
So , had some time to upgrade ebay special short shifter to a C's one
A few photos here
A few photos here
- Andreika609
- LotM Winner
- Posts: 556
- Joined: Thu May 16, 2013 9:29 pm
- My Generation: 4G
- Location: LONDON
- Has thanked: 3 times
- Been thanked: 9 times
Andreika609 4gen BB2 Value sports prelude
Hello
A few months went pass and now prelude in a winter storage
So what is going on you ask ?
At first back to stock
Yep had to go for an MOT Atr exhaust manifold was installed with new flexi joint. Cold air intake with AEM filter. Also AEM wideband
Success MOT is done and road legal for next 2 years
Then put my fun tyres
Advan ad08r 225/45 yep all 4 wheels
Had to adjust height of the car in front as its too low now and later in the back also
And in for a wheel alingment , also traction bar was aligned
Went for a cruising for some time to time to see how my engine doing. Oil pressure is good , drives good. Find out my axles have some play . need to sort it at some point. Also at the allingment shop had some isues with rear toe and camber . Not good not terrible . Ordered some hardrace stuff ( will talk about it later )
And now prelude is in a storage till april Daily civic is in there too
BONUS
bought 2 more hondas
Another prelude ( actually have it for a year now and its in a track car progress )
And a sleeper accord
A few months went pass and now prelude in a winter storage
So what is going on you ask ?
At first back to stock
Yep had to go for an MOT Atr exhaust manifold was installed with new flexi joint. Cold air intake with AEM filter. Also AEM wideband
Success MOT is done and road legal for next 2 years
Then put my fun tyres
Advan ad08r 225/45 yep all 4 wheels
Had to adjust height of the car in front as its too low now and later in the back also
And in for a wheel alingment , also traction bar was aligned
Went for a cruising for some time to time to see how my engine doing. Oil pressure is good , drives good. Find out my axles have some play . need to sort it at some point. Also at the allingment shop had some isues with rear toe and camber . Not good not terrible . Ordered some hardrace stuff ( will talk about it later )
And now prelude is in a storage till april Daily civic is in there too
BONUS
bought 2 more hondas
Another prelude ( actually have it for a year now and its in a track car progress )
And a sleeper accord
- Andreika609
- LotM Winner
- Posts: 556
- Joined: Thu May 16, 2013 9:29 pm
- My Generation: 4G
- Location: LONDON
- Has thanked: 3 times
- Been thanked: 9 times
Andreika609 4gen BB2 Value sports prelude
Should i make a track prelude profile ?
Loads done in a year so could update with some progress photos time to time
Loads done in a year so could update with some progress photos time to time
- Andreika609
- LotM Winner
- Posts: 556
- Joined: Thu May 16, 2013 9:29 pm
- My Generation: 4G
- Location: LONDON
- Has thanked: 3 times
- Been thanked: 9 times
Andreika609 4gen BB2 Value sports prelude
So no time for a black prelude . It started overheat at some point and i just left her in the garage for some time , but spent some time on track lude few photos of it for now
Me and my buddy tryed to make a heat extractor on the hood and it came better than expected oh and the car became red at some point
Bumpers , wings are the next in the list
And bam on the car New front glass and old rear and quarters was reglued also
Hood and trunk now also painted and on the car will update photos later Next is the doors and side skirts , slowly but going forward
Me and my buddy tryed to make a heat extractor on the hood and it came better than expected oh and the car became red at some point
Bumpers , wings are the next in the list
And bam on the car New front glass and old rear and quarters was reglued also
Hood and trunk now also painted and on the car will update photos later Next is the doors and side skirts , slowly but going forward
- Drax
- Moderator
- Posts: 6271
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 16 times
- Been thanked: 383 times
Andreika609 4gen BB2 Value sports prelude
lots of yummy progress here will several ludes keep the updates on any of them pouring in
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL