Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
4th/5th gen Energy suspension poly front top mount and end link bushes
-
- Posts: 520
- Joined: Mon Apr 11, 2016 10:59 am
- My Generation: 5G
- Location: Cheltenham
- Has thanked: 49 times
- Been thanked: 25 times
4th/5th gen Energy suspension poly front top mount and end link bushes
Have some poly bushes left over from the full kit which i didn't use and i hate to see stuff go to waste so im just selling these for the cost of postage.
Front top mount bushes set 4th/5th gen
4 - 8096 - Upper Shock Mount Bushing Halves
Front end link bushes set 4th/5th gen, these replace the rubber bushes on the control arm side of the endlink
4 - 8181 - End Link Grommets
4 - Washers for 8181
Rear end link bushes set 4th gen, these replace the rubber bushes on the control arm side of the endlink
2 - 8189 - End Link Bushing
1 tube of silicone bushing grease
£3 posted each seat or £5 the lot
Front top mount bushes set 4th/5th gen
4 - 8096 - Upper Shock Mount Bushing Halves
Front end link bushes set 4th/5th gen, these replace the rubber bushes on the control arm side of the endlink
4 - 8181 - End Link Grommets
4 - Washers for 8181
Rear end link bushes set 4th gen, these replace the rubber bushes on the control arm side of the endlink
2 - 8189 - End Link Bushing
1 tube of silicone bushing grease
£3 posted each seat or £5 the lot
Last edited by Max on Thu Oct 27, 2022 6:02 pm, edited 2 times in total.
-
- Posts: 520
- Joined: Mon Apr 11, 2016 10:59 am
- My Generation: 5G
- Location: Cheltenham
- Has thanked: 49 times
- Been thanked: 25 times
4th/5th gen Energy suspension poly front top mount and end link bushes
The bushes will fit OEM top hats which if i understand correctly is what you have to use on the SS as they dont come with top hats.
- Vtecmec
- LotM Winner
- Posts: 5383
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 122 times
- Been thanked: 351 times
4th/5th gen Energy suspension poly front top mount and end link bushes
Super streets do not use oem top hats, so these won't work for that.
They will fit the newer street advance, as they do use the oem top hats.
They will fit the newer street advance, as they do use the oem top hats.
- K30DPC
- LotM Winner
- Posts: 1105
- Joined: Fri Aug 09, 2013 7:45 am
- My Generation: 4G
- Location: GB/Poland
- Has thanked: 17 times
- Been thanked: 17 times
4th/5th gen Energy suspension poly front top mount and end link bushes
Super streets can/could be bought with Tein top hats but will work with oem hats as well. I bought full set, and the question is are the bushes the same? Did anyone ever had a chance to compare them? By the look of teins they are the same but I don't have oem ones to compare dimensions
my BB1 UKDM
-
- Posts: 520
- Joined: Mon Apr 11, 2016 10:59 am
- My Generation: 5G
- Location: Cheltenham
- Has thanked: 49 times
- Been thanked: 25 times
4th/5th gen Energy suspension poly front top mount and end link bushes
If it helps anyone even if only for reference I can give you some dimensions as i have both the ES poly ones here along with some brand new rubber OEM style ones from Febest,
ES: OD 42.5mm, ID 14mm, Height 20mm
Febest: OD 42mm, ID 14mm, Height 20mm
The ES ones have a higher shoulder before the top cone section of the bush at 13mm, Febest 10mm, so the ES look and feel much beefier.
I was quite surprised at how squished the old rubber bushes i have here were as they are now only 16.5mm in height, it doesnt sound like much but when you compare the two its like oh yeah that thing is toast! Plus the old ones have virtually no cone shape left to them.
ES: OD 42.5mm, ID 14mm, Height 20mm
Febest: OD 42mm, ID 14mm, Height 20mm
The ES ones have a higher shoulder before the top cone section of the bush at 13mm, Febest 10mm, so the ES look and feel much beefier.
I was quite surprised at how squished the old rubber bushes i have here were as they are now only 16.5mm in height, it doesnt sound like much but when you compare the two its like oh yeah that thing is toast! Plus the old ones have virtually no cone shape left to them.
- K30DPC
- LotM Winner
- Posts: 1105
- Joined: Fri Aug 09, 2013 7:45 am
- My Generation: 4G
- Location: GB/Poland
- Has thanked: 17 times
- Been thanked: 17 times
4th/5th gen Energy suspension poly front top mount and end link bushes
Thanks mate. I'll measure what I pulled out from teins. They may be like yours old rubbers as I had some slight noises from the rear but didn't find anything so far.
my BB1 UKDM
-
- Posts: 520
- Joined: Mon Apr 11, 2016 10:59 am
- My Generation: 5G
- Location: Cheltenham
- Has thanked: 49 times
- Been thanked: 25 times
4th/5th gen Energy suspension poly front top mount and end link bushes
Edited the first post as I'm just selling these for the price of postage if anyone wants them
- Vtecmec
- LotM Winner
- Posts: 5383
- Joined: Fri Aug 06, 2010 5:43 pm
- My Generation: 4G
- XBOX GamerTag: vtecmec
- Location: East Midlands
- Has thanked: 122 times
- Been thanked: 351 times
4th/5th gen Energy suspension poly front top mount and end link bushes
I'll take them thanks. I'll drop you a PM.