Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by **Ammo** » Fri Feb 24, 2012 1:17 pm

Must order a chip, but now you've dangled V3 and V4's I dunno which to go for

Had one in the old lude but it was from whoever was doing them before Sleepy, so must have been the V1 map

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Fri Feb 24, 2012 2:06 pm

Yes as far as I can make out the Sleepy chip and Darfsport chip before that on Honda Revolutions was a Spoon V1 copy. That's the copy I now have.

As for differences in maps??? I just can't use anything to see how they differ, apart from parameters, but lately with trying to alter the Spoon V2 rev limit I have found out it won't work and the code is different.

I still offer just the V2 chip for JDM P13's, but as soon as I get the ok I'll offer the V1 chip with the raised limiter. Beyond that, the fuel/ignition maps might be the same or different. I don't know until someone dynos them back to back and hopefully with an A/F ratio printout too.

Hope that's clear.

JayJay · Post by **JayJay** » Fri Feb 24, 2012 2:26 pm

Yep makes sense. Don't forget to let us know any changes that are found out!

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Fri Feb 24, 2012 4:32 pm

Don't worry I will - but it's ultimately in someone elses hands.

eDaniel · Post by **eDaniel** » Sat Jun 23, 2012 11:03 pm

I would get one of your chips for JDM H22A

Just let me know whether it needs a knock sensor as the stock one. This is not a deal breaker but I would like to know whether I should take my knock sensor back as I gave it for repair. Thanks.

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Sat Jun 23, 2012 11:54 pm

Hey bud, ah crap - forgot to repy to your PM!

I'll spell it out on here for others too. Does the Spoon map need the knock sensor? Well I don't know if I'm honest - on P28's using Crome and the like you can disable many sensors - I wonder if Spoon did on the P13 map??? Never had anyone ask or check this bud.

There's only one way to test it I'm afraid, and that's to try one. It's a cracking chip anyway, so I'd recommend it whether it ignores the knock sensor or not. It's up to you if you want one, let me know - sorry I don't have a more definitive answer.

Cheers,

Rob

eDaniel · Post by **eDaniel** » Sun Jun 24, 2012 9:15 am

Fair enough, Rob. Thanks.

Post by **Merlin** » Mon Jun 25, 2012 9:39 am

nucleustylzlude wrote:Hey bud, ah crap - forgot to repy to your PM!

I'll spell it out on here for others too. Does the Spoon map need the knock sensor? Well I don't know if I'm honest - on P28's using Crome and the like you can disable many sensors - I wonder if Spoon did on the P13 map??? Never had anyone ask or check this bud.

There's only one way to test it I'm afraid, and that's to try one. It's a cracking chip anyway, so I'd recommend it whether it ignores the knock sensor or not. It's up to you if you want one, let me know - sorry I don't have a more definitive answer.

Cheers,

Rob

My Spoon ECU doesnt seem to mind (power wise) that I dont have a knock sensor. It still gives the knock sensor CEL though. I have no idea what my Spoon ECU is comparable to, ie what version of chip.

Post by **Ammo** » Tue Jun 26, 2012 1:27 pm

Finally got my chip from Rob working due to my dodgy soldering. If i'd had planned it properly and had a solder sucker when i tried to solder the chip in I'd have done it the first time lol

Vtec in 1st and 5k Vtec crossover

Seems less lazy then it was but that could just be cos i've been driving the slow ass VW's for the past week

eDaniel · Post by **eDaniel** » Tue Jun 26, 2012 8:12 pm

Great stuff. I will get one for myself soon