5th gen touch screen heater controls

gordonlear · Post by **gordonlear** » Sat Aug 04, 2012 2:13 pm

Since my touch screen for the heater controls has died, I am looking in replacing it with the standard heater controls. Could someone please put a photo of the rear of the standard heater control panel so I can compare the wiring. Has anyone done this before?

mills · Post by **mills** » Sun Aug 05, 2012 11:54 am

Im on it buddy

gordonlear · Post by **gordonlear** » Sun Aug 05, 2012 12:33 pm

Thanks, are all 5th gen heater controls the same?

mills · Post by **mills** » Sun Aug 05, 2012 12:36 pm

No idea mate, ive only ever taken the controls out of my JDM lude. I'll have that pic shortly though, just going out to take it now

Post by **cebul** » Sun Aug 05, 2012 1:00 pm

There is 3 diferent heaters controls made in Prelude - manula - UK Prelude, Digital - CC - JDM, and Digital Touch Screen - Jdm.

What exactly you want to do - remove the touch screen and put digital one - CC...??

mills · Post by **mills** » Sun Aug 05, 2012 1:18 pm

here you go bud

nitin_s1 · Post by **nitin_s1** » Sun Aug 05, 2012 1:25 pm

Don't forget some of our AC controls are on the Hazard light switch as well. So we need to swatch all those bits too.

gordonlear · Post by **gordonlear** » Sun Aug 05, 2012 4:43 pm

What I was thinking was to take out the whole touch screen system and the climate control unit, which is normally a click on other preludes and replace the whole lot. But looking at mills photos I don't have anything to fix the standard heater unit to? Probably have to change the wiring loom from the heater unit. Not sure about the hazard light switch yet.

mercutio · Post by **mercutio** » Sun Aug 05, 2012 5:17 pm

get a full dash loom from a breaker

Post by **cebul** » Sun Aug 05, 2012 5:19 pm

I'm afraid you need to converte whole system. You can have a look here, this is write up how to converte manula to digital, mayby you can match some wiring diagrams to yours;

http://www.preludepower.com/forums/show ... p?t=297770