Multiple Gen4 2.2 aftermarket/standard parts required!

[honda-hardy]

dont forget that if changing the ukdm rear number plate surround you will also need a set of jdm number plate lights too. i changed mine when i did the swap. the uk light mount into the surround and the jdm mount into the metal itself. as for drilling, it aint that bad, the metal has flat areas where the studs for the surround needs to be drilled and bolted through.

[vanzep]

Ok, considering I can't sleep..

Right, first off I wasn't expecting such a quick reply; and I don't actually get paid for another 8 days! However, I will definitely purchase any parts I list as being interested in, if still available on 28/03/13. And will undoubtedly be after more stuff the month after too. So;



Vanzep - I'm interested in the bumper & the manifold. How much for both of those? After a slightly louder exhaust though tbh, & defo a larger tip than 2.5 as I like the deep sound. Would possibly be interested in the centre section though at the right price if in good condition.

Thanks.

Here is a link to the parts http://www.ludegeneration.co.uk/cars-br ... t4754.html
stainless manifold/downpipe and straight thru powerflow centre section and back box. rear bumper and lip. Looks like £60 delivered on the back bumper. The exhaust system is sleeved at the downpipe to centre section and the centre section to backbox. Id take £120 plus delivery for the whole system tip to tail. The link also shows the lenso wheels that @newkid might be looking to sell. Hope this helps.

Here is a few pics of the exhaust - which i just removed last week.










should also say that any parts you get from myself and newkid (as he lives nearby) can be combined into 1 shipment to save on carriage costs.

[Dbo]

got a set of 17" Konig Hurry2 with tyres


1 rim has some kerbing and will need a referb but they are all straight with no flat spots

will let these go for offers around £120

[CrunchyAdams82]

How much tread is on the tyres DBO?

[CrunchyAdams82]

Thanks for the influx of replies people! Thought I might have trouble finding some of the parts I needed, but apparently not..

Lots of great stuff; wish I could afford it all, but unfortunately I have limited funds.

So I'm going to have to go for the best offers & most appealing items of course, which means I can get the most for my money.

With that in mind, I'll go through all the replies & messages I have and work out what I want, and then revise the list of what I do & do not still require.

Many thanks to you all!

[Dbo]

How much tread is on the tyres DBO?

as said they are Konig Hurry 2 ultralite at 16lb a rim, they are 17"x7J offset +40 and 4x114.3 PCD
the tyres are different brands and are 215/45/17 and are useable.
i would say 3mm to 4mm runners



but as said 1 rim had bad time in the snow and has 2 kerb gashes and 1 small chunk next to bead but fixable if you wanted it done, but no rim leak of air

if you want closer pics can post some up

[CrunchyAdams82]

Ok, thanks Dbo. Let me have a think on those.

[CrunchyAdams82]

Should I feel quite lucky about picking up the car for £370 then?

[Pedrodog66]

Have a speedo unit for sale, check out my for sale thread. Can also do the jdm starter motor, zebra mats, jdm decat made by solid fabrications and a 2.5" s/s cat back exhaust with oval pipe made by Meerkat. Will post photos to you later but you can see the speedo on my thread. Fancy a set of 18" wheels if you want to go bigger!

[CrunchyAdams82]

Just to let people know, I have provisionally sourced everything I need for now. If that changes I will make another request. Will most likely need more stuff at the end of next month anyway.

Thanks for all the help.