So has anyone got one I can cut up? Needs to be 2.5 really which is a bit of a long shot I guess, but it's the flanges I'm after really.
Cheers
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
2.5 inch decat pipe, or just the flanges
2.5 inch decat pipe, or just the flanges
I'm getting a universal sports cat to save me doing the yearly MOT shenanigans. The guy who's going to weld it up said it would be easier and cheaper to cut and weld my old decat pipe onto the new sports cat, but I'd rather not destroy my old decat as it's got a silencer built in and I might want to swap back for trackdays etc.
So has anyone got one I can cut up? Needs to be 2.5 really which is a bit of a long shot I guess, but it's the flanges I'm after really.
Cheers
So has anyone got one I can cut up? Needs to be 2.5 really which is a bit of a long shot I guess, but it's the flanges I'm after really.
Cheers
-
vanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 505 times
@indigolemon has a solid fab jdm size decat - pretty sure its 2.5" with quite large flanges - youd have to check with him - mind u i dont know if hes actually planning to sell it.
or ive got a decat in my for sale thread - think its 55m id sure its a non standard size - quite long at 42cm so possibly perfect for chopping up as it has good thick flanges;)
or ive got a decat in my for sale thread - think its 55m id sure its a non standard size - quite long at 42cm so possibly perfect for chopping up as it has good thick flanges;)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
-
Pedrodog66
- Posts: 153
- Joined: Sun Apr 29, 2012 10:50 pm
- My Generation: 4G
I've also go it a solid Fab jdm decat that I will sell, will send you a pic tomorrow and you can let me know if you are interestedvanzep wrote:@indigolemon has a solid fab jdm size decat - pretty sure its 2.5" with quite large flanges - youd have to check with him - mind u i dont know if hes actually planning to sell it.
or ive got a decat in my for sale thread - think its 55m id sure its a non standard size - quite long at 42cm so possibly perfect for chopping up as it has good thick flanges;)
Thanks guys,
106pete who makes up new decat pipes might be able to get some new flanges ready to weld straight up, so I'll see how that goes first.
I had a look at your decat vanzep, it would do but I'd need to grind the inner edge of the flanges about 5mm all the way round to make it 2.5 inch, which with hand tools would be a bit of a ballache.
106pete who makes up new decat pipes might be able to get some new flanges ready to weld straight up, so I'll see how that goes first.
I had a look at your decat vanzep, it would do but I'd need to grind the inner edge of the flanges about 5mm all the way round to make it 2.5 inch, which with hand tools would be a bit of a ballache.