BB1 Drivers Side Window regulator + Motor

h10ndr · Post by **h10ndr** » Sat May 11, 2013 1:24 pm

Hi,

My drivers side window has chewed through at least 2 of the teeth on the window regulator and the window is now bouncing on the last 1 inch of travel. The motor is fine but the gears are shot also.

I'm looking for a mint condition drivers side mechanism including motor please.

If anyone can help that would be great. I have a block of wood holding the window up the last 1cm.

Regards All

Post by **rob quilter** » Sat May 11, 2013 1:54 pm

Are they the same as 5th gens?

h10ndr · Post by **h10ndr** » Sat May 11, 2013 2:16 pm

Erm..dunno

Anyone?

Post by **rob quilter** » Sat May 11, 2013 2:18 pm

If they are, I have one.

h10ndr · Post by **h10ndr** » Sat May 11, 2013 2:40 pm

Yes GJMHONDA2012, that will be the one.

Thing is, I want to replace with one without the same wear as mine. I have a pic on my phone which I will upload tonight for you to look at. Its only of the broken teeth part not the whole thing. But its held in the door with 3 / 4 bolts and you lower the window to access 2 other bolts to remove the glass, then it folds up and pull out the access hole in the door.

Basically the motor has a gear drive too which can become worn. I need a pair with no rust and good gears.

There are some on ebay but they are all from abroad or are the wrong side - or from a 5th Gen. They do look different to the 4th gen though.

If you could remove and check that would be worth mucho rep points

h10ndr · Post by **h10ndr** » Sat May 11, 2013 4:07 pm

Yes, thats fine. I'll load my pic up this evening. This is a good one from ebay...

Its the drivers side I want...not sure if the one in the pic is right/left tbh.

h10ndr · Post by **h10ndr** » Sat May 11, 2013 11:23 pm

They go on ebay for around £20-25

Here is the motor detached from the mechanism - you can see the gear is rusty and crumbling...

... and this shows you the missing regulator teeth

h10ndr · Post by **h10ndr** » Sat May 11, 2013 11:54 pm

Cheers buddy. rep.

h10ndr · Post by **h10ndr** » Mon May 13, 2013 7:05 pm

Hiya, that sounds good but would like to see pictures though so I know what I'm buying, and dont forget to add your forum name to the pics.

Then everyones happy on here...

Cheers

h10ndr · Post by **h10ndr** » Tue May 14, 2013 12:44 am

Does yours have the coil spring shown in this picture on the regulator arm?

Lude Generation

BB1 Drivers Side Window regulator + Motor

BB1 Drivers Side Window regulator + Motor

Re: BB1 Drivers Side Window regulator + Motor