WANTED: Crank Pulley Tool ****

[Kawa]

Anyone know if these are these any good?

[vanzep]

doesnt fit the lude im afraid - its 45mm and think the lude is 50mm across flats. if you do want the 45mm one ive got one here - brand new in packaging

[Kawa]

Thanks buddy - I will continue to track down the Si's

@nucleustylzlude

[nucleustylzlude]

Pm'd ya back. I have a Laser one spare, but hadn't even thought to check if the size was off. Better measure it.

I'll get the beast posted up to you Terry.

[DaveyBa8]

Jam the flywheel, had mine of in 5mins the last day.

[nucleustylzlude]

While it works, not necessarily the best method out there. Certainly for me, I don't fancy screwing up a £500 Jun flywheel.

Plus have you actually seen the monster we're talking about, this is a tool:

[DaveyBa8]

Wow!! Yous guys make that??

This is what I use.



I know the box is of, but can be gotten through the starter or flywheel cover plate underneath.

Jun flywheel, man that would be nice to have.

[vanzep]

Yep i jammed the flywheel as well Davey but that was only due to the fact that the laser one i bought off ebay was 45mm and not 50mm - on the back of the packaging for the laser one its says suitable for 94-95 prelude im just wondering if the 2ltr prelude has a different size crank..maybe someone knows?




50mm accross flats is definately the one for vtec 4th gens the legendary (from puk days)big bessie that nuke has is 50mm

[si]

Theres the beast, this was made so it would jam against the floor while doing work on the engine still in situ, we tried a laser one and it bent, this baby aint bending!!

While it works, not necessarily the best method out there. Certainly for me, I don't fancy screwing up a £500 Jun flywheel.

Plus have you actually seen the monster we're talking about, this is a tool:

[lucas]

just make one from a 50mm nut (if you can find one) and weld it to a steel bar

this is what i done