Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
3G headlamp bulb fitting?
3G headlamp bulb fitting?
Can anyone advise on what bulbs the 3rd gen Preludes take, and how to fit the buggers?
-
indigolemon
- The Chaos Engine
- Posts: 6680
- Joined: Wed Jun 30, 2010 1:45 pm
- My Generation: 4G
- PSN GamerTag: M149YSL
- Location: Kelty, Fife
- Has thanked: 24 times
- Been thanked: 71 times
- Contact:
H4's I believe, flip the lights up and grab a philips head screwdriver, take the black cowls off, and you remove the whole reflector unit.
'On two occasions I have been asked, 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question.' - Charles Babbage
-
honda-hardy
- Club Cartographer
- Posts: 6268
- Joined: Sat Jan 28, 2012 7:35 pm
- My Generation: 5G
- Location: chippenham
- Been thanked: 1 time
almost right. the bulb could be a sealed beam. if so you will need to get a second hand unit that will house the h4 bulb. i gave nathan some of my old ones.
also the headlight is held in by a sprung loaded metal frame that has adjusting screws and springs, all you need to do is push the metal frame off of these spring adjusters with out turning them with a screwdriver as this will adjust the beam.
also the headlight is held in by a sprung loaded metal frame that has adjusting screws and springs, all you need to do is push the metal frame off of these spring adjusters with out turning them with a screwdriver as this will adjust the beam.
