All Prelude H22's use the same belts.
Gates belts:
http://www.ebay.co.uk/itm/GATES-Micro-V ... o9CyCm6ZaQ
http://www.ebay.co.uk/itm/GATES-4PK1020 ... SwHjNV~VUj
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Crank pulley bolt and Woodruff key
-
- Posts: 609
- Joined: Sun Jan 31, 2016 6:11 pm
- My Generation: 5G
- Been thanked: 8 times
Wicked mate cheers. Hopefully theres no damage to the crank and I am ready to roll on Saturday. Itching to drive the lude again.
I came before the chicken.. The argument is now settled!!
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
- vanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 504 times
Yes the pulley cant really come off as its right up against the bodywork but if the bolt has come loose then you will still need to inspect the keyway to see if it has been damaged/enlarged and id recommend fitting a new woodruff key so you can check this. When my pulley came loose i took the pulley off and found the keyway was damaged so i had to replace the pulley.Free Ranj Egg wrote:@Merlin - the bolt is loose - I can turn it by hand.
@vanzep - the pulley hasn't come off at all mate, its still on the car. I just mentioned the woodruff and crank bolt as im changing the belts so if I need them I would get them.
I don't know how long I was driving the car when the belt slipped. Im hoping I haven't damaged the crank.
If the crank is damaged how can one tell. There was no difference to how the car drove to be honest.
I doubt you have damaged the crank tho

1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
-
- Posts: 609
- Joined: Sun Jan 31, 2016 6:11 pm
- My Generation: 5G
- Been thanked: 8 times
I have brought a new key and bolt so hopefully the pulley isn't damaged. I need to take the car to Gatwick on Tuesday so im hoping its a straight forward fix
I came before the chicken.. The argument is now settled!!
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red