4th gen bonnet dimensions

Kezz · Post by **Kezz** » Fri Feb 22, 2013 7:06 pm

I don't suppose anyone knows the dimensions of the bonnet , I am going to carbon wrap it but don't know how much to order... I don't have my car at the moment otherwise I would measure it myself

Dbo · Post by **Dbo** » Fri Feb 22, 2013 10:52 pm

when i did mine i ordered 1.5 mitre by 1mitre and had enough left to do the sunroof

Post by **ADS1** » Fri Feb 22, 2013 11:30 pm

Dbo wrote:when i did mine i ordered 1.5 mitre by 1mitre and had enough left to do the sunroof

You sure about those measurements? Bonnet must be wider than 1 metre surely??
Only saying because am thinking of doing mine too.

Dbo · Post by **Dbo** » Sat Feb 23, 2013 12:05 am

sorry

my bad!!!!
just checked where i bought the wrap from and they came back with

1.5 metre x 3 metre for the prelude
and i bought 1 x 1.5 for my kids seat leon cupra

SORRY

Post by **Ammo** » Sat Feb 23, 2013 12:11 am

Off my head I think the 4g bonnet is 1.5m by 1.2m ish

It's deffo over the stock vinyl width of 1.5m by 1m as it comes in the running metre normally

This is off the top of my head though, but deffo over a set metre of wrap vinyl

Kezz · Post by **Kezz** » Sat Feb 23, 2013 10:17 am

Cheers guys, ill get the 4 d one as it looks really nice, around £35 for 1500x1500 , should leave enough to do the splitter ... Think ill look into doing sunroof too..mother black carbon looks the dogs

Dbo · Post by **Dbo** » Sat Feb 23, 2013 10:28 am

please let us know the results you get!
tried the 4d on my sons and it was a bit thin and was not sticky enough in some places so started to bubble after a week around the tight edges

the stuff i used 3M Di-Noc seemed a lot thicker/heavy duty and have had no problem with it and is 2 years on now

Post by **ADS1** » Sat Feb 23, 2013 10:50 am

Dbo wrote:please let us know the results you get!
tried the 4d on my sons and it was a bit thin and was not sticky enough in some places so started to bubble after a week around the tight edges

the stuff i used 3M Di-Noc seemed a lot thicker/heavy duty and have had no problem with it and is 2 years on now

Any chance of a link to the website where you got yours mate? Am thinking of doing this myself, as bonnet is scratched.

Kezz · Post by **Kezz** » Sat Feb 23, 2013 11:32 am

This one is nice, my lad just got some for his colt and the finish is great
http://www.ebay.co.uk/itm/1m-x-1-52-4D- ... 4ac1bb6c61

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Sat Feb 23, 2013 9:22 pm

Shameless plug, but if someone needs a decent condition bonnet to try it out on, I'm practically tripping over mine in the garage since removing it. Free to a good home that can collect.