EML code 17 vss

Post by **Lude-dude** » Thu Feb 21, 2013 6:32 pm

have you cleared the code or ecu reset

could be old stored code maybe?

Post by **Lude-dude** » Thu Feb 21, 2013 6:59 pm

I would check its connected if its been messed with before

bristol_bb4 · Post by **bristol_bb4** » Thu Feb 21, 2013 7:27 pm

Check if it's been chopped at the engine side, noobs put the converter chip there! Might be broken!

Post by **indigolemon** » Sun Feb 24, 2013 12:05 am

Hey man, had a similar issue after my engine swap. Turned out a pin was broken in the vss plug on the engine loom. Could be worth a check?

Post by **indigolemon** » Sun Feb 24, 2013 2:13 pm

newkid wrote:@indigolemon you sir are a star, one of the wires on the original plug was cut right down and not joined up correctly, swapped the plug in from the breaker and all good to go + rep Reads in kmh but ill just use my uk el dials as they dont need a convertor

Glad to hear it's sorted man! I'd swapped the VSS before I discovered the knackered pin on mine