Breaking 5th gen prelude PRICE DROP

AdrianH2B · Post by **AdrianH2B** » Thu Feb 28, 2013 7:18 pm

Donald wrote:If I've got this right:

The A5 has A5 cams and pistons.

The ATR/A8/Type S use the same cams.
The ATR/A8/Type S use the same pistons.

If you want the best out of the higher CR don't you sort of need those cams too?

I'm probably way off but maybe a wizard can confirm.

You are correct!

Lewis - A crower Stage 2 is similar in spec to type-s cams but the type-s cams have perfect drivability

Type-S cam's are good for 240-50hp

LewisH · Post by **LewisH** » Thu Feb 28, 2013 7:21 pm

Ive been looking at the skunk 2 stage 2 cams atm. If the skunk 2 cams are no more aggressive then ill get atr/s cams.

AdrianH2B · Post by **AdrianH2B** » Thu Feb 28, 2013 7:30 pm

Skunk2 Pro2's are more aggressive, but youll loose a touch torque on the mid-range i think it was, im not a 100% sure though

i do know crower stage 2's are similar in spec and i think the Skunk2 tuner 2's

LewisH · Post by **LewisH** » Thu Feb 28, 2013 7:34 pm

Yeah there the cams im looking at along with skunk 2 inlet, TB and a hondata ecu mapped. Headwork, skunk2 cam springs etc and typs s pistons etc.

Post by **Donald** » Thu Feb 28, 2013 7:37 pm

I'm sure I remember reading that the S2 IM is very similar to the ATR one but of course modded properly for the Prelude. If you're thinking of buying new I'm sure you'd be better off spending far less modifying the ATR one?

LewisH · Post by **LewisH** » Thu Feb 28, 2013 7:38 pm

Id rather a brand new skunk 2 tbh, looks sexier in the bay too

@AdrianH2B how long will it be till you have the rear LCA's off ??

AdrianH2B · Post by **AdrianH2B** » Thu Feb 28, 2013 8:10 pm

ATR one is better far better and its dyno proven!

Ill get them off on Saturday buddy posted Monday

LewisH · Post by **LewisH** » Thu Feb 28, 2013 8:12 pm

When i get my headwork done, the skunk2 inlet will be port MATCHED to the head. I cant see how its going to be so different.

That would be awesome

AdrianH2B · Post by **AdrianH2B** » Thu Feb 28, 2013 8:17 pm

i would get into it, but its boring and this is thread not meant for that!

No worries buddy

LewisH · Post by **LewisH** » Thu Feb 28, 2013 8:21 pm

PM me ?