Multiple Gen4 2.2 aftermarket/standard parts required!

CrunchyAdams82 · Post by **CrunchyAdams82** » Tue Mar 19, 2013 11:05 pm

Hello all,

I am after some parts for my 1994/L 2.2 uk spec project Lude. Hoping you guys have some of these parts knocking about. I require the following;

1. Red bumpers in good condition. Mine are acceptable, but have cracked/broken paintwork & require respraying. I would rather not have to do this.

2. JDM starter motor. I had a jap spec 2.2 about 10 years ago, and it had a metallic awesome sound every time I started it up which made me smile. The one I have currently sounds like poo.

3. 17" Alloys. I can only spend up to £200 on these, and they do have to look right; wheels are quite personal. But what you got?

4. Lowering springs. 30-40mm probably.

5. Decat Pipe & s/s branch manifold.

6. Square number plate mountings. These look better on the prelude imo.

7. Full set of mats in good condition.

8. Magnecor or similar ignition leads.

9. 2.2 Tachometer/Rev counter panel (Manual). Somebody fitted a 2.0L automatic version in my car - not overly helpful.

10. Cat-back system possibly! If it's worth having, I may be interested. My plan is to get a uprated branch manifold, decat pipe, and Powerflow system. I had a Powerflow backbox with 5" slash-cut tail on my last prelude, and it sounded incredible! If you have something equivalently appealing, let me know..

If you have any of these parts, or anything else exciting you think might interest me, please get in touch.

N.B. I don't know if there are any upgradable parts for my engine which will give me slightly better performance; such as throttle body, inlet manifold, coil pack (mine has a distributor), ECU, etc. If there are, please let me know as I will be interested.

Many Thanks.

Andy 07447052593
Apa200182@gmail.com

CrunchyAdams82 · Post by **CrunchyAdams82** » Tue Mar 19, 2013 11:08 pm

Forgot to mention;

11. Red, rust-free sunroof. If there is such a thing.

Post by **Pushki** » Tue Mar 19, 2013 11:09 pm

Welcome to LG Crunchy!

Have you looked in the 'Parts for Sale' section?
I know for a fact there was a JDM numberplate holder for sale, unless it's sold since yesterday.

JDM-BB4 · Post by **JDM-BB4** » Tue Mar 19, 2013 11:21 pm

@crunchyadams82 I have a jdm starter motor, black jdm rear number plate holder and a Blueflame stainless steel exhaust system with decat and an Accord type R manifold for sale in this thread.
http://www.ludegeneration.co.uk/cars-br ... t5826.html

Post by **vanzep** » Tue Mar 19, 2013 11:30 pm

Hi Andy,
Ive got a few of the parts your looking for
pretty near mint milano red ukdm back bumper and lip - was resprayed about 3 years ago so no fading

and
full stainless 2" powerflow system and stainless manifold - very nice exhasut imo - quite and smooth but a great sound in vtec

Parts are in Edinburgh but can be shipped out at cost.

CrunchyAdams82 · Post by **CrunchyAdams82** » Tue Mar 19, 2013 11:54 pm

Wow, thanks for the quick reply guys! I gotta be up at 04:00 for work, so let me digest this in the morning & get back to you. Ta.

Post by **Gayno** » Wed Mar 20, 2013 12:05 am

It's worth noting that the JDM rear number plate surround WON'T fit into the UKDM boot recess. Well it will fit, but the mounting bolts are in a different place so you will have to get happy with a drill to make it fit properly.

JDM-BB4 · Post by **JDM-BB4** » Wed Mar 20, 2013 12:09 am

Gayno wrote:It's worth noting that the JDM rear number plate surround WON'T fit into the UKDM boot recess. Well it will fit, but the mounting bolts are in a different place so you will have to get happy with a drill to make it fit properly.

Yes, this or swap the whole tailgate over.

Post by **Gayno** » Wed Mar 20, 2013 12:22 am

JDM-BB4 wrote:swap the whole tailgate over.

or that

CrunchyAdams82 · Post by **CrunchyAdams82** » Wed Mar 20, 2013 12:30 am

Ok, thanks for that info - food for thought. Would it be tricky trying to drill the required holes then?