Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

H22A8 Engine Rattle

Engine/Gearbox questions and discussion
Post Reply
C12HLL
Posts: 60
Joined: Thu Mar 07, 2013 9:10 pm
My Generation: 5G

H22A8 Engine Rattle

Post by C12HLL » Sat Mar 16, 2013 4:26 pm

Hope some of you guys can advise me on this one,

Rattle only starts once hot and going through the rev range and on deceleration. Please tell me i'm not going mad it is just the heatshield's needing reseated or removed.

Hope this works. Never posted video before.

Image
Last edited by C12HLL on Sat Mar 16, 2013 4:29 pm, edited 2 times in total.

User avatar
LewisH
Posts: 1712
Joined: Fri Dec 14, 2012 6:31 pm
My Generation: 5G
XBOX GamerTag: Hepges
Location: Lowestoft

Post by LewisH » Sat Mar 16, 2013 4:27 pm

It worked
BB8 UKDM VTi

User avatar
si import
Supporter 2016
Posts: 1255
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

Post by si import » Sat Mar 16, 2013 4:33 pm

could possibly be an exhaust blow on the downpipe . where the two pipes go into one
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

User avatar
M@dds
Posts: 375
Joined: Mon May 21, 2012 7:54 pm
My Generation: 5G
XBOX GamerTag: Exerriddiam
Location: Stroud
Has thanked: 5 times
Been thanked: 13 times

Re: H22A8 Engine Rattle

Post by M@dds » Sat Mar 16, 2013 5:27 pm

I had this 2 years ago,

I reckon it's your heat shield on either your catalyst ( top or bottom) bolts tend to rust and the shield works free on the corners, taken me some time to locate.

Either that or it is your bottom end I guess, I hope not though :/

C12HLL
Posts: 60
Joined: Thu Mar 07, 2013 9:10 pm
My Generation: 5G

Post by C12HLL » Sat Mar 16, 2013 5:35 pm

Still revs through and is silent when cold. Bottom end would normally rattle its head off when cold AFAIK.

I hope.

User avatar
Dbo
LotM Winner
Posts: 1761
Joined: Thu Feb 02, 2012 2:55 pm
My Generation: 4G
Location: Southampton

Post by Dbo » Sat Mar 16, 2013 6:11 pm

have you taken the mani heatshield off to look under?
i had a rattle but stopped when i removed every heatshield i could find :lol:
Image

C12HLL
Posts: 60
Joined: Thu Mar 07, 2013 9:10 pm
My Generation: 5G

Post by C12HLL » Sat Mar 16, 2013 6:19 pm

that's tomorrows job. It will be up in the air anyways getting a full service inc timing belt and getting lowering springs fitted.

Strangest one i found was on my old EP3 and it was the driveshaft heatshield rattling. That's an annoying noise.

C12HLL
Posts: 60
Joined: Thu Mar 07, 2013 9:10 pm
My Generation: 5G

Post by C12HLL » Sun Mar 17, 2013 5:30 pm

UPDATE: Turns out to be the timing belt tensioner.

So have hopefully got one coming on Tuesday and then can do the timing belt and rid myself of the rattle.

There was a rattle from the cat heatshield also but that got resolved today.

C12HLL
Posts: 60
Joined: Thu Mar 07, 2013 9:10 pm
My Generation: 5G

Post by C12HLL » Sun Mar 24, 2013 5:17 pm

UPDATE 2: Timing belt and auto tensioner done and all good with the noise. VTEC my old friend. Its been a while coming but was worth it. :twisted:

User avatar
Thebusofwoe
Supporter 2014
Posts: 2670
Joined: Mon Mar 11, 2013 11:47 pm
My Generation: 4G
Location: Salisbury, Wiltshire
Been thanked: 2 times

Post by Thebusofwoe » Sun Mar 24, 2013 5:54 pm

I was going to say tensioner, when they go loose,they then cause the distributor to rattle, sounds just like the vid u posted. We had people diagnosing all sorts of things, even someone came in and said 'I've fitted a dizzy and it's still rattling'. :roll: :lol: . Glad you got it sorted chap. :D
One life, LIVE IT! Get VTEC, LOVE it. Drive a Honda and ENJOY it.

Build thread : http://www.ludegeneration.co.uk/profile ... t7849.html

Post Reply

Return to “Engine / GearBox”