Burst a coolant hose earlier today - fortunately had a sharp knife, pliers and tub of coolant in the car so got it home OK.
So what I'm looking for is what appears to be called a "water inlet hose". It looks abotu 17mm ID, and runs from under the VTEC solenoid, alongside the bottom rad hose for a while, then down to the heater control thingy at the bottom middle of the bulkhead.
Would rather not give the local H dealer £35 for one, so if anyone can help with a decent one I'd appreciate it!
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
WTD: H22a Heater inlet hose
-
JDM-BB4
- Posts: 667
- Joined: Mon Jan 30, 2012 1:03 am
- My Generation: 4G
- PSN GamerTag: JDM-BB4
- Location: Stirling, Scotland
@Angus
I think I have one handy, it doesn't run directly into the heather matrix pipes on the bulkhead does it? But to the valve just in front of the bulkhead?
I think I have one handy, it doesn't run directly into the heather matrix pipes on the bulkhead does it? But to the valve just in front of the bulkhead?
Prelude history: black bb4, silver bb4, green bb8, project eX, JRSC 5th gen Motegi.
Current rides: Honda s2000 GT & Honda Accord type R Honda Civic FD2 Type R !!
