alloys ser 5 prelude

Prelude402 · Post by **Prelude402** » Fri Apr 12, 2013 2:03 pm

my 2000 prelude has 4x114pcd and (I believe) 55mm offset and i'm finding it impossible to get 18inch alloys to fit without sticking out of the bodywork. any ideas?

Post by **Merlin** » Fri Apr 12, 2013 2:11 pm

Welcome to LG!!!

4x114? Is your car a 2.0? They are out there, example - http://www.ebay.co.uk/itm/18-VOLVO-S40- ... 1e751f3c65

But 18's look too big on Ludes IMO.

Supermarine Blues · Post by **Supermarine Blues** » Fri Apr 12, 2013 6:38 pm

Yup; 17"s are the biggest you'll need.

You might want to consider a 5-bolt conversion; loads of Hondas run a +55 offset for steering purity.

Post by **rob quilter** » Fri Apr 12, 2013 6:42 pm

As said....17's are better suited to Preludes.

Post by **Pushki** » Fri Apr 12, 2013 6:44 pm

http://www.ludegeneration.co.uk/wiki/in ... Tyre_Sizes

Prelude402 · Post by **Prelude402** » Sat Apr 13, 2013 12:06 pm

thanks guys, you've given me hope. might just try 17s

craig_jdm · Post by **craig_jdm** » Sun Apr 14, 2013 8:51 am

i had 17s on my old 5g when i bought it and i thought they were too big 16 is perfect imo

mills · Post by **mills** » Fri Apr 19, 2013 11:26 pm

welcome to LG