Brake bleed sequence

Post by **ADS1** » Sun Apr 21, 2013 2:55 pm

Forgot to print off the brake bleed sequence before leaving to do my brakes.
Can someone please post up the correct sequence for 4g please.

Thanks.
Tony.

Post by **RattyMcClelland** » Sun Apr 21, 2013 3:12 pm

You start with the furthest one away from the cylinder.
So
N/S Rear
O/S Rear
N/S front
0/S front

Post by **ADS1** » Sun Apr 21, 2013 3:19 pm

Thanks bud, thought that was correct, but just wanted to be sure.

Thanks.

Post by **Vtecmec** » Sun Apr 21, 2013 5:50 pm

Oddly, the sequence is different than usual, it's in the manual, but not furthest away and work inwards!

Post by **Vtecmec** » Sun Apr 21, 2013 5:52 pm

Just looked it up........

Rear right
front left
rear left
front right

Post by **DaveyBa8** » Sun Apr 21, 2013 6:54 pm

Vtecmec wrote:Just looked it up........

Rear right
front left
rear left
front right

That's an age old battle either corner to corner or furthest away. I always go furthest away, either way air will be coming out lol.

Post by **Vtecmec** » Sun Apr 21, 2013 7:11 pm

No battle, its what the Honda service manual states!

LewisH · Post by **LewisH** » Sun Apr 21, 2013 7:14 pm

I thought it was start at the closest and go to the furthest =(

Post by **Merlin** » Sun Apr 21, 2013 8:57 pm

I have always done what's easiest and it never made any difference.

Post by **ADS1** » Sun Apr 21, 2013 9:39 pm

Well i've done them once by what ratty said. Got to do them again tho to be sure, as most of the fluid came out while changing lines.
Will do them by the manual next time