Drax's JUN Prelude: Papa Smurf edition

[mart609]

[bucks420]

good work Drax and fingers crossed the top end knocking has dissappeared . thought i'd ask how you went about fitting the hondata as i still havnt got round to trying mine? anything like what i found or totally different?
random one but can you remember what times you pulled at the pod when you were last there?

cheers
matt

[Edson]

Looks sweet and nice mate
Now take some course Japanse haha !

[Bri]

Sweet, when the pennys are better you will have to take me there Dan. No worries on the call, I know how it goes

Glad the top end noise has gone

[Drax]

cheers everyone

good work Drax and fingers crossed the top end knocking has dissappeared . thought i'd ask how you went about fitting the hondata as i still havnt got round to trying mine? anything like what i found or totally different?
random one but can you remember what times you pulled at the pod when you were last there?

cheers
matt

you have a pm mate

[Drax]

found the pics from weekend before last where we swapped the cam belt etc

new belt on and cams fitted


we fabricated our own honda tool to hold the auto tensioner down while we fitted the belt on


works a treat




and general pics of the action arena


old k-swapped teg undercovers after mate rolled it
then went and bought a GTR R33 liner lol




putting it back together



oh and todays latest Japanese special purchase came today in a box with nice colourful jdm stickers


4G Si-vtec Prelude model kit




i was like a kid with a new Airfix set




proper mini lude stickers!!

[honda-hardy]

i love them model ludes. i got a 3rd and a 4th gen.

[Drax]

MOT time!
and a fail lol first in several years, but ah well. list is:
nearside headlamp aim incorrect will sort later in the dark
both anti roll bar linkages excessive play parts orders, due this sat
rear fog not working already fixed - dodgy bulb
nearside front windscreen washer is poo blast with an air can sorted it
handbrake crap (whats new!) new disks and pads already bought weeks ago, just had to fit them yesterday

also, had the new wheels resprayed by a mate so looking much better will get pics up when i have chance.
also, fitted the battery cut off switch, and started fitting the new battery tray in the boot - more to do tomorrow as well as cleaning & polishing!

[Merlin]

You didnt fancy the H23 tensioner conversion?


Al least the fixes for the MOT are cheap

[Drax]

You didnt fancy the H23 tensioner conversion?


Al least the fixes for the MOT are cheap

considered it, but i was just too lazy in the end lol aye their pretty cheap as chips!

here the new wheels sprayed and typeart'd last weekend


fitted




finally did the battery relocation today, new tray going at the rear offside using two existing holes - just had to drill through one to get two bolts to hold down the tray as i wasnt keen on just having the one


two long mounting bolts did the job


come through the underneath spot on


cleaned up some crap from underneath the centre console while doing the cabling and what did i find hidden under a carpet...


...but a jdm fuel card


original jdm yo!


fitted the wiring down the middle (and tightened the handbrake at the same time)


console bit in from both sides, cable fed through gromit behind fuse box worked a treat


connect up the cut off switch and shove the panel back on


shoved in the battery just bob on, hooked it up and worked first time without fail wohoo!!


hopefully the droplinks will arrive tomorrow so need to fit them, then clean the car ready for sunday and that all ill have time to do for another bloody month or so .... CDA cone fitment needs to be done...