disk sizes

LudeIOW · Post by **LudeIOW** » Thu Aug 22, 2013 2:42 pm

hi guys just wondered if anyone is able to give me the disk sizes front and back for a '99 2.2 vti auto?

going to be buying all round disks and pads off ebay and want to make sure they are right.

also have the choice of either blanks or vented on the front, atm i have grooved and drilled vented disks on the front is one a better choice than the other? would it pay to stick with vented?

any help would be great

thanks in advance

LudeIOW · Post by **LudeIOW** » Thu Aug 22, 2013 2:48 pm

i know they are cheap but its just till i have the funds to upgrade i was looking at these -

http://www.ebay.co.uk/itm/HONDA-PRELUDE ... 707wt_1066

or these

http://www.ebay.co.uk/itm/HONDA-PRELUDE ... 112wt_1066

any thoughts?

BMCC · Post by **BMCC** » Thu Aug 22, 2013 3:01 pm

oem is vented on front. So anything less is going to be a downgrade IMO. Unless of course your current brakes are totally fooked.

The second link is class:

2.2 V TECH VTi (BB6/8) VTEC FFS!
1997 - 2001
(Will Only Fit 5 Stud Models)

The Brake Package Comes With The Following Items:

Front Disc Fitment
2x Set Of Front Brake Discs (1 For Each Wheel) ONE FOR EACH WHEEL FFS!
282mm diameter across
5 Stud Wheel Hole/Nuts
Vented Double Wall Brake Discs
4x Set Of Front Brake Pads (2 For Each Wheel) FFS!

LudeIOW · Post by **LudeIOW** » Thu Aug 22, 2013 3:09 pm

i must admitt that made me chuckle too couldnt help but picture someone trying to fit 2 disks on one wheel and wondering why it wouldnt work

doesn`t exactly fill be with confidance tbh

but in regards to size an quality do you think these will do the job for the time being?

BMCC · Post by **BMCC** » Thu Aug 22, 2013 3:16 pm

No 100% sure if that is the sizes of the rear and front disks, I think it is. I'm sure someone will let you know for definite. I used non oem disks with yellow stuff pads (just can't remeber off hand who made the disks). Hopefully somone has used this setup before and can confirm the quality of the disks and pads. I'd rather know they were going to stop me when I needed them to!

LudeIOW · Post by **LudeIOW** » Thu Aug 22, 2013 3:21 pm

BMCC wrote:...I'd rather know they were going to stop me when I needed them to!

i conpletely agree as i will be using the lude to transport my two young kids id like to know they are going to work