Coilovers

CrunchyAdams82 · Post by **CrunchyAdams82** » Mon Mar 24, 2014 10:55 pm

That certainly would..

rodanmk2 · Post by **rodanmk2** » Tue Mar 25, 2014 12:38 am

Gayno wrote:UKDMhatesyou drives a Prelude?!

Well I never....

Yarp. Tried to leave Honda many times. Always come back. Had a 3rd gen that I loved but had to part with. Always wanted a 4G and luckily grabbed one before the SMX went bang.

bb1boy · Post by **bb1boy** » Tue Mar 25, 2014 9:17 am

I sense a Tokyo Squad coilovers group buy in the midst...

Post by **rob quilter** » Tue Mar 25, 2014 9:19 am

Prices will be between £530-£550, They are spec'd as most high end coilovers. They are Monotube (not shitty twin tube), filled with FUCHS oil and nitrogen, NOK seals, KOYO bearings. We've had quite a few customers switch from Teins to ours, and rate ours better.

Post by **Thebusofwoe** » Tue Mar 25, 2014 1:30 pm

Sweet. Even affordable, even for me

. Looking foward to them

nitin_s1 · Post by **nitin_s1** » Tue Mar 25, 2014 2:07 pm

rob quilter wrote:Prices will be between £530-£550, They are spec'd as most high end coilovers. They are Monotube (not shitty twin tube), filled with FUCHS oil and nitrogen, NOK seals, KOYO bearings. We've had quite a few customers switch from Teins to ours, and rate ours better.

It would be great if you could do what Tein Superstreet did by adding EDFC controllers so you can change the hardness from within the car..

Post by **rob quilter** » Tue Mar 25, 2014 2:11 pm

nitin_s1 wrote:
rob quilter wrote:Prices will be between £530-£550, They are spec'd as most high end coilovers. They are Monotube (not shitty twin tube), filled with FUCHS oil and nitrogen, NOK seals, KOYO bearings. We've had quite a few customers switch from Teins to ours, and rate ours better.
It would be great if you could do what Tein Superstreet did by adding EDFC controllers so you can change the hardness from within the car..

Already costs around £6,000+ per vehicle to develop new coilovers. I'd probably need £50k to develop an EDFC style system.

Mudgey · Post by **Mudgey** » Tue Mar 25, 2014 2:23 pm

What would be even better is if you could connect it up to the VSS, steering & G Sensor on our 5th Gen Type S's so that we can have an active suspension

Just imagine that! Could have it lovely and soft for cruising around and then auto adjust damper/rebound based on the various sensor inputs. Surely an Arduino, some servo's and a controller is all you need? Not that I have a clue about software programming...

Post by **rob quilter** » Tue Mar 25, 2014 2:24 pm

CrunchyAdams82 · Post by **CrunchyAdams82** » Tue Mar 25, 2014 2:52 pm

So how easily adjustable will these coilovers be Rob? Where can we get recommendations on spring rates (Front vs Rear)?

And what adjustment options are there? (I'm no expert in this field)!