Driveshafts spline count

A1ex · Post by **A1ex** » Wed May 14, 2014 9:18 pm

Does anyone know the drive shaft bore / spline count on the 5th gen prelude drive shafts?

I'm looking at some h22 civic shafts, I'll be putting the 5g prelude hubs on the civic so want to be sure I'm ordering the right shafts.

The options are;

32mm hub nut 26 spline
or
36mm hub nut 28 spline

I'm guessing is the latter as the prelude is a bigger car, but I want to be sure.

K30DPC · Post by **K30DPC** » Wed May 14, 2014 9:34 pm

I don't think there is a different between 4g and 5g. On my 4g there is 36mm nut, and I'm using 5g shafts which I bought from forum member, but they arrived without nuts. According to manual I had to use new ones anyway

When I was buying hem I just ordered prelude ones and without specifying the year. So I think 36mm is the right size.

I know 32mm nuts are on civic driveshafts

A1ex · Post by **A1ex** » Wed May 14, 2014 10:00 pm

Thanks for the info. I think I sent the shafts to you

Post by **newkid** » Wed May 14, 2014 10:02 pm

You sure 5g hubs fit? even if they do you'd need to make your own shafts up then as all off the shelf h22 civic shafts are designed for civic hubs

A1ex · Post by **A1ex** » Wed May 14, 2014 10:15 pm

newkid wrote:You sure 5g hubs fit? even if they do you'd need to make your own shafts up then as all off the shelf h22 civic shafts are designed for civic hubs

That's why the manufacturer offers 2 sizes

http://hondaperformanceparts.co.uk/driv ... mm-hub-nut

Post by **newkid** » Wed May 14, 2014 10:18 pm

A1ex wrote:
newkid wrote:You sure 5g hubs fit? even if they do you'd need to make your own shafts up then as all off the shelf h22 civic shafts are designed for civic hubs
That's why the manufacturer offers 2 sizes

http://hondaperformanceparts.co.uk/driv ... mm-hub-nut

Thats because different civics an itr's have 2 different sizes bud.

Post by **newkid** » Wed May 14, 2014 10:29 pm

This helps tho, the 28 spline ones will work

http://www.hondatuningmagazine.com/tech ... iveshafts/

Can I ask why your using the prelude hubs tho?

A1ex · Post by **A1ex** » Wed May 14, 2014 10:33 pm

This is why I want to know the prelude spline count & bore size. A full set of teg hubs costs like £300, whereas I'll have a full set of prelude hubs already and if theyre the same as the teg ones its money in a puddle

Ted · Post by **Ted** » Wed May 14, 2014 10:35 pm

Who's doing this alex ? I have loads of civic/prelude shafts available for mis mstches

A1ex · Post by **A1ex** » Wed May 14, 2014 10:42 pm

Ted wrote:Who's doing this alex ? I have loads of civic/prelude shafts available for mis mstches

I am! About time I got stuck in. From what I've found, the drivers side fits from the lude but the passenger is an inch too long. Wanted to use the lude hubs for 5 stud plus their beefier