Euro Bubble body kit for 4 gen. Japspeed strut braces.

nitin_s1 · Post by **nitin_s1** » Sat Aug 09, 2014 9:33 pm

Interested in the PLM header, depending on the pictures

mart609 · Post by **mart609** » Sun Aug 10, 2014 1:47 am

Also interested in the header.
Downpipe included?

EG_H22 · Post by **EG_H22** » Sun Aug 10, 2014 9:47 am

Hmm you could be right on that one mate i wouldn know though. Spirit9 sell the drag version for £410 so you may have a good price there.

crigal.bb6 · Post by **crigal.bb6** » Sun Aug 10, 2014 11:47 pm

mart609 wrote:Also interested in the header.
Downpipe included?

Offcoures. All three connecting stages included. The whole manifold, down to the 2.5" outlet

.

EG_H22 wrote:Hmm you could be right on that one mate i wouldn know though. Spirit9 sell the drag version for £410 so you may have a good price there.

That sounds about right. Worth every penny in my opinion. Im sure anyone else that has one of these manifolds would back me up on that.

Post by **vanzep** » Mon Aug 11, 2014 11:04 am

Here are a few pics of my 2nd hand PLM Tri-Y after a bit of a clean up and polish before i fitted it:)

Its is supplied in 4 sections as shown below

One small shallow notch in front cross member - can be done on the car and it fits like a glove - as far as a i can see it takes the same route as the oem pipe and is tight up against the sump so ground clearance isnt really an issue and my lude is lowered

Great manifold

and as far as i am aware PLM only make 1 version of this manifold so it is the drag racing one..
Hope this helps - GLWS

nitin_s1 · Post by **nitin_s1** » Mon Aug 11, 2014 11:31 am

Did I get the first dibs on manifold or has mart?

Post by **newkid** » Mon Aug 11, 2014 1:54 pm

@vanzep theres actually 3 they make

https://www.privatelabelmfg.com/Honda_H ... s_s/43.htm

Yours is the 4-2-1 bud which is for mid and top end power that all the Americans have and rate highly with the dynos to prove.

The drag is a 4-1 which is mainly for top end power, powerdriven is a 4-1 but a longtube version (believe this is the one @rattymcclelland has all be it a genuine one)

Post by **RattyMcClelland** » Mon Aug 11, 2014 2:23 pm

Yep mine us a genuine Hytech long tube version.
As newkid says it's very top end power orientated.
Very high flowing up top with sacreficed midrange torque.

However I paid double that for a 2nd hand version.
Make these plm headers a true bargain.

Post by **DaveyBa8** » Mon Aug 11, 2014 5:05 pm

These the ones that are on the American eBay? Or are they copies of the copies? Lol looking to buy a new one.

EG_H22 · Post by **EG_H22** » Mon Aug 11, 2014 5:42 pm

Mines ok ive had it all welded up though as i was happy with the bolts coming loose all the time when my beast rumbles lol