parts i need for my 4th gen

quarkhimself · Post by **quarkhimself** » Fri Mar 13, 2015 10:25 am

hi guys, i'm looking for the following parts for my 4th gen :

- center rear speaker
- fog lights
- one piece JDM headlights ( at this point i'm not worried if they're black or silver)
- battery tie down, driveshafts, circlips and bolt that go on the end of the driveshaft (DELIVERED! THANKS @vanzep)

if anyone has some of these parts let me know, i would be interested in taking them off your hands.

Post by **Merlin** » Fri Mar 13, 2015 10:28 am

quarkhimself wrote:circlips and bolt that go on the end of the driveshaft

Do you mean driveshaft set rings? For the ends that go into the gearbox? Also bolt, what do you mean by that?

quarkhimself · Post by **quarkhimself** » Fri Mar 13, 2015 10:47 am

Merlin wrote:
quarkhimself wrote:circlips and bolt that go on the end of the driveshaft
Do you mean driveshaft set rings? For the ends that go into the gearbox? Also bolt, what do you mean by that?

to be honest, i'm not even sure

from what i understand from what my mechanic told me, i need a nut that goes on the wheel end of the driveshaft, and that thing that looks like a circlip. i think both these parts go on the wheel side and not on the gearbox side. hopefully they come with the driveshaft i end up buying

quarkhimself · Post by **quarkhimself** » Fri Mar 13, 2015 10:54 am

Merlin wrote:
quarkhimself wrote:circlips and bolt that go on the end of the driveshaft
Do you mean driveshaft set rings? For the ends that go into the gearbox? Also bolt, what do you mean by that?

i think it might be something like this :

http://www.ebay.co.uk/itm/HONDA-ODYSSEY ... 20e84958de

this is a set of 250 and i only need one ...

Post by **Merlin** » Fri Mar 13, 2015 11:04 am

quarkhimself wrote: from what i understand from what my mechanic told me, i need a nut that goes on the wheel end of the driveshaft

That is the hub nut

And yes that is the driveshaft set ring. Set rings are available from Honda for £2 each. Part number 44319-S0A-300. If you are replacing all of them you need 3. The hub nuts are £6 odd each part number 90305-SD4-003.

Honda recommend that you replace the set rings with new ones. For the price of hub nuts I would just get new as well. They get mashed up after a while if they get taken off a few times.

http://www.lingshondaparts.com/honda_ca ... k_03=23027

Post by **Drax** » Fri Mar 13, 2015 11:26 am

- driveshafts
- circlips and bolt that go on the end of the driveshaft

@Bri ?

Post by **vanzep** » Fri Mar 13, 2015 1:12 pm

I have most of these parts here

headlights are ukdm black backed ones.(have pair)- imo theyre better than jdm ones
pass shaft would need checked reassembled with new cv boot(not included)
driver shaft was refurbed about 2 years ago
also have set rings ,clips etc (not new)
oem battery tie down with two ties and nuts

parts in edinburgh

quarkhimself · Post by **quarkhimself** » Fri Mar 13, 2015 7:43 pm

thanks for your help guys. for me the most urgent thing to find is the driveshaft. all the others are on the list and i will buy them in the near future.

@Merlin do you usually order parts from that website ?
@vanzep i'm not interested in the ukdm headlights, sorry buddy. car is JDM and i'm trying to keep it that way. i'll send you a PM to get some information on the driveshafts.

Post by **Merlin** » Fri Mar 13, 2015 8:49 pm

quarkhimself wrote:@Merlin do you usually order parts from that website ?

No I just use it for part numbers and get the bits from the local dealer. You can put part numbers in to Ebay and it sometimes shows parts.

quarkhimself · Post by **quarkhimself** » Mon Mar 16, 2015 4:56 pm

quick update - battery tie down and driveshafts are paid for, waiting for delivery. updated the first post .
will be looking for the remaining items on the list next month.