Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

adjusting valve clearences

Engine/Gearbox questions and discussion
Post Reply
User avatar
Drax
Moderator
Posts: 6342
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 24 times
Been thanked: 431 times

adjusting valve clearences

Post by Drax » Fri Jun 19, 2015 1:25 am

Was doing this on Wills lude tonight and found that cylinder 2 & 4 on the intake side, one was stuck open so much we couldn't tighten it and the other was stuck closed so much we couldn't close it :?

All the other valves adjusted fine, cylinder 1& 3 plus the exhaust side of cylinders 2 & 4 adjusted fine :?

Any ideas? Maybe timing is out? Didn't look like it had skipped a tooth. Its running like a bag of crap now :x
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL
Top
User avatar
Drax
Moderator
Posts: 6342
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 24 times
Been thanked: 431 times

Post by Drax » Fri Jun 19, 2015 11:11 am

problem solved, I did the order wrong :facepalm: ....ffs.
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL
Top
User avatar
Sailor
Supporter 2016
Posts: 3290
Joined: Tue Jul 17, 2012 7:36 pm
My Generation: 0G
Location: Hampshire
Has thanked: 62 times
Been thanked: 141 times
Contact:
Contact Sailor

Post by Sailor » Fri Jun 19, 2015 11:55 am

Well done for diagnosing the problem ..... and admitting to the cause.
International Pensioner of Mystery
Top
Post Reply

Return to “Engine / GearBox”