Anyway bit about my cars/Hondas, admittedly ive never owned a lude although I do like the 4G and would like to own one at some point, however I have had 10-12 ATRs (lost count
![Laughing :lol:](./images/smilies/icon_lol.gif)
So a bit about the one of most interest H22 DC2. The engine started off in an ATR which had previously been built by Rich at PA to a very nice spec, making around 280bhp NA! Was an awesome car but having bought it like that it didn't feel much like my own even after a few changes. So I decided it was time to make my ultimate Honda and swap the engine into a very tidy 98 DC2 which I bought the year before (from Dino on here).
The ATR and DC2 that started
![Image](http://i303.photobucket.com/albums/nn140/kimbo-k-o/IMG_1815_zpsev3k8wbv.jpg~original)
![Image](http://i303.photobucket.com/albums/nn140/kimbo-k-o/IMG_1628_zpsddbu8hzp.jpg~original)
Here is the end result..
![Image](http://i303.photobucket.com/albums/nn140/kimbo-k-o/186B427B-8832-472B-804D-41D10AB1958F_zps1tnak1qx.jpg~original)
![Image](http://i303.photobucket.com/albums/nn140/kimbo-k-o/46AF0A60-E038-4E5A-B1DC-EC1B477DC833_zpswacdjojo.jpg~original)
![Image](http://i303.photobucket.com/albums/nn140/kimbo-k-o/2C306B91-11EE-48E8-8F3E-7C5510F402A9_zpsapczzrps.jpg~original)
![Image](http://i303.photobucket.com/albums/nn140/kimbo-k-o/C9B35DEF-5653-4F41-BEF2-FE86BB035E84_zpsgzzczjod.jpg~original)
![Image](https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/12246940_10206423944332138_7231280931350375571_n.jpg?oh=86323b51649a21f8fe1ccf62d61b9926&oe=57192762)
![Image](https://scontent-lhr3-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/12294914_1069318656445594_5324449349675803611_n.jpg?oh=ee496c774c7f4d86fed1df1788da399d&oe=56E583A8)
Spec now as follows..
Chassis/Suspension:
• Meister-R Zeta-R coilovers with 12kg front & 10kg rear springs
• OEM DC2 front & rear strut braces
• Complete chassis rebush with superflex polybushes & new OEM Honda rear trailing arm bushes
Drivetrain:
H22A7 Engine
• Innovative 75A DC2 H22 swap mounts
• H22A P13 Head – Full race port & combustion chamber work (4 angle valve and seat cut, combustion chamber/valve de shrouding, porting, knife edge dividers and port throat blend).
• Skunk2 Pro 2+ Cams
• Skunk2 Pro Adjustable Cam Gears
• Supertech Dual Valve springs
• Supertech Retainers
• Supertech SS Nitride Flat Face Valves
• Supertech Valve Seals
• Supertech Bronze Valve Guides
• Skunk2 70mm Throttle Body
• H22A7 Intake Manifold - Throttle & port matched
• H22A7 Block - Re-bored & Specialist Finish Hone
• H22A7 Crankshaft - Full Journal Polish
• Carrillo Pro-A Beam Rods
• Mahle 11.5:1 Gold Series Pistons
• ACL Rod & Main Race Bearings
• Complete Bottom End Dynamic Balancing
• Balance Shaft Delete Kit
• H22A7 baffled sump
• Fidanza Lightweight Flywheel
• H23 Manual Tensioner Conversion
• Honda S2000 Injectors
• B18C IACV
• JDM H22A distributor
• Magnecor KV85 Ignition Leads
• Unorthodox racing lightweight alternator pulley
• Hytech Custom 2.5” Long Tube H22 Header
• 3” custom TGS V-band exhaust system with removable centre silencer
• Modified Accord Type-R K&N Typhoon Intake piping
• Blox velocity stack air filter
• EGR Delete
• O2 Sensor Delete
• Rywire OBD2A > OBD1 ECU conversion harness
• P28 ECU + Hondata S300 V3 mapped by WIll at RDT
Gearbox
• M2F5 prelude gear set
• Quaife Helical LSD
• M-Factory 4.64 Final drive
• Custom H series driveshafts with 98 Spec DC2 outer CVs
• OEM Honda clutch
Engine Bay:
• ABS removed
• Aircon removed
• PAS removed
• EVAP tank/Vac lines removed
• Tegiwa Alloy radiator
• Red samco radiator hoses
• Full engine bay wire tuck
• Full engine loom wire tuck
• Fuse box relocated into cabin
• Odyssey battery relocated into boot
• Smaller washer bottle tucked
• Clutch fluid reservoir tucked
• Clutch line tucked
• Power and earth cables tucked
• Slim line fan tucked
• New Honda OEM bolts and brackets
• OEM 98 spec HID ballasts removed, aftermarket HID kit tucked
• Throttle cable tucked
• Braided fuel lines & fuel filter tucked
• Smaller radiator overflow tank tucked
• Redundant brackets/holes removed
• Chassis modifications for H22 gearbox & shift cables
Brakes/Wheels/Tyres:
• ABS Removed
• EK9 Non-ABS prop valve
• 300mm Accord Type-R Twinpot front brakes – Bremtech grooved discs & Hawk HP+ pads
• 262 standard 98 spec rear brakes – Bremtech discs & Hawk HPS pads
• 16” OEM 98 spec Enkei wheels fitted with 215/45 Kumho KU36’s
• HEL braided brake lines all round
• Motul RBF600 Brake Fluid
Exterior:
• OEM Honda Access wind deflectors
• OEM Honda S2000 Aerial
• Colour coded front bumper intake scoop
• New OEM Honda Badges all round
• ‘B18 FTL’ Private registration
Interior:
• Defi DIN Gauge for oil temp, oil pressure & water temp
• Headunit and speakers removed
• Personal Neo Grinta suede steering wheel
• OEM Honda Access JDM floor mats
• OEM Honda JDM flare
• OEM Honda JDM RX pedals
• Standard DC2 red Recaro seats and interior
• Bride low driver seat rail for OEM Recaro
• H22 shifter mounted under OEM DC2 interior console trim
Comments welcome!