The car was in daily use until the MOT gave up, and nothing felt untoward on the front end during the track day. to confirm you need the drivers side lower arm? suspect its heavy to post so would probably need 35quid delivered.Aaron14P wrote:Ofs lower suspension arm any gooood?!?
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
*GONE* 5th Gen 2.2VTI Manual - Breaking for parts - *GONE*
-
Scott560
- Posts: 1407
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 263 times
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance
-
Scott560
- Posts: 1407
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 263 times
roof clip - yes, but its beige?Jackson Bondy wrote:Have you got the small, circular clip that rotates to hold the headliner in the roof? And do you have the D.S Rear Pillar trim?
Also does it have the black door trims and dash surround?
DS rear pillar trim - Not sure exactly which piece you need. The upper pillar bit (the bit with the seatbelt) is fine. The rear drives side door card has a couple of marks (the lower part with the arm rest).
http://www.scottwoodcock.co.uk/Prelude5 ... 202345.jpg
doors and dash can be seen here:
http://www.scottwoodcock.co.uk/Prelude5 ... 202230.jpg
http://www.scottwoodcock.co.uk/Prelude5 ... 202326.jpg
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance
okay bud, and yeah the drivers side lower adnn pleaeScott560 wrote:The car was in daily use until the MOT gave up, and nothing felt untoward on the front end during the track day. to confirm you need the drivers side lower arm? suspect its heavy to post so would probably need 35quid delivered.Aaron14P wrote:Ofs lower suspension arm any gooood?!?
-
Free Ranj Egg
- Posts: 609
- Joined: Sun Jan 31, 2016 6:11 pm
- My Generation: 5G
- Been thanked: 8 times
Im after the glove box door if you have that please mate?
I came before the chicken.. The argument is now settled!!
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
-
Scott560
- Posts: 1407
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 263 times
Just removed them, perfect condition with no tabs broken (woohoo). £6 posted.Andy1000 wrote:ooking for black plastic caps for seat rails at back of the passenger seat in the rear footwell
Do you still have them and can you pm me a price
http://scottwoodcock.co.uk/Prelude560/2 ... 200106.jpg
PM me for paypal details if acceptable.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance
-
Scott560
- Posts: 1407
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 263 times
Removed. Its beige, apart from a 1inch scratch and minor mark - very good condition. Hinges/screws/stoppers/rubber dampers included.Free Ranj Egg wrote:Im after the glove box door if you have that please mate?
http://scottwoodcock.co.uk/Prelude560/2 ... 200352.jpg
http://scottwoodcock.co.uk/Prelude560/2 ... 200416.jpg
Would need £15 delivered. If acceptable pm me for paypal details.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance
-
Scott560
- Posts: 1407
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 263 times
Will PM you as to when this is removed - will try to do this Saturday morning. If you are in no hurry for it let me know so i'm not busting a gut.Aaron14P wrote:okay bud, and yeah the drivers side lower adnn pleaeScott560 wrote:The car was in daily use until the MOT gave up, and nothing felt untoward on the front end during the track day. to confirm you need the drivers side lower arm? suspect its heavy to post so would probably need 35quid delivered.Aaron14P wrote:Ofs lower suspension arm any gooood?!?
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance
cheers mate, its not an emergency but if you can get it done saturday it would be appreciated!Scott560 wrote:Will PM you as to when this is removed - will try to do this Saturday morning. If you are in no hurry for it let me know so i'm not busting a gut.Aaron14P wrote:okay bud, and yeah the drivers side lower adnn pleaeScott560 wrote:The car was in daily use until the MOT gave up, and nothing felt untoward on the front end during the track day. to confirm you need the drivers side lower arm? suspect its heavy to post so would probably need 35quid delivered.Aaron14P wrote:Ofs lower suspension arm any gooood?!?
