Prelude parts wanted....

James H · Post by **James H** » Tue Nov 16, 2010 4:58 pm

Hey boys & girls am after a few parts for my newly aquired th gen Prelude, shes a 2.0 manual.....

Set of alloys 16" or 17" obvioulsy 4x114.3 (decent offset preferred, as i want them to fit snug)

Exshaust system or backbox (not too loud)

Lowering srings or coilovers

Aftermarket front grill

Any front, side & rear splitters/skirts

Clear side repeaters

Aftermarket panel filter (not induction kit)

Window wind derflectors

.... sure there is more i want but have forgotten, thanks people.

Ideally near or in Hampshire would be great, James 07821715173

Post by **indigolemon** » Tue Nov 16, 2010 8:39 pm

For alloys you should be able to grab anything that will fit a 4th gen prelude (they were all 4x114). For a panel filter you should be able to grab the K&N one easily enough, sure opie oils sell em (http://www.opieoils.co.uk).

Beyond that, you're onto the 5G specific stuff, so I'll leave that to someone who knows more than me!

James H · Post by **James H** » Wed Nov 17, 2010 4:36 pm

For alloys you should be able to grab anything that will fit a 4th gen prelude (they were all 4x114)

I have been looking all over the show but am struggling to find decent set out of the limted ones going they are either too expensive, too small or just sets!

Post by **indigolemon** » Wed Nov 17, 2010 4:52 pm

Quick squint on egay, found these:

http://cgi.ebay.co.uk/17-FINICHI-ALLOY- ... _500wt_922

James H · Post by **James H** » Thu Nov 18, 2010 6:39 am

Good find, they must have been added dam recently! As been trying ebay regurlaly! Many thanks bud