Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Driveshaft help

Engine/Gearbox questions and discussion
Post Reply
User avatar
Prelude danny
Posts: 452
Joined: Tue Aug 25, 2015 5:38 pm
My Generation: 4G

Driveshaft help

Post by Prelude danny » Thu Dec 08, 2016 7:03 pm

I'm going to be doing a auto to manual conversion and I'm getting a intermediate shaft bit will part of my auto Driveshaft fit into the intermediate shaft or do I need to buy a new shaft to go into the intermediate shaft??

The long bar below is what my car has now
Image

Sent from my E6653 using Tapatalk
Top
Online
User avatar
Vtecmec
LotM Winner
Posts: 5490
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 149 times
Been thanked: 441 times

Post by Vtecmec » Thu Dec 08, 2016 7:05 pm

Won't fit.
Top
User avatar
Prelude danny
Posts: 452
Joined: Tue Aug 25, 2015 5:38 pm
My Generation: 4G

Re: Driveshaft help

Post by Prelude danny » Thu Dec 08, 2016 7:22 pm

So I need a manual shaft to fit the intermediate shaft

Sent from my E6653 using Tapatalk
Top
User avatar
vanzep
Supporter 2016
Posts: 7142
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 305 times
Been thanked: 504 times

Post by vanzep » Thu Dec 08, 2016 9:01 pm

yep the manual car has a intermediate shaft which goes into the gearbox and the passenger side manual driveshaft (shorter than the auto shaft) fits onto that.
you can use a 5th gen intermediate shaft instead of a 4th gen one - its a bit lighter alloy than the heavy steel one on the 4th gen but you will need a manual passenger side driveshaft to fit to it. :)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
Top
User avatar
Prelude danny
Posts: 452
Joined: Tue Aug 25, 2015 5:38 pm
My Generation: 4G

Re: Driveshaft help

Post by Prelude danny » Thu Dec 08, 2016 9:11 pm

vanzep wrote:yep the manual car has a intermediate shaft which goes into the gearbox and the passenger side manual driveshaft (shorter than the auto shaft) fits onto that.
you can use a 5th gen intermediate shaft instead of a 4th gen one - its a bit lighter alloy than the heavy steel one on the 4th gen but you will need a manual passenger side driveshaft to fit to it. :)
I'll stick with the 4th Gen intermediate shaft, I've just bought the intermediate shaft, I just need a manual Driveshaft to fit it

Sent from my E6653 using Tapatalk
Top
Post Reply

Return to “Engine / GearBox”