Manual conversion

thusee · Post by **thusee** » Thu Dec 15, 2016 2:33 pm

theres a couple of threads on google that show exactly what parts you need to do the manual swap.

I can't remember which resistor it is, there is a thread with pictures on which resistor to move to which spot and also what all parts you need for the swap and some cost break downs etc.

Post by **JEBB4** » Fri Dec 16, 2016 12:18 am

http://twiki.pgmfi.org/bin/view.pl/Libr ... AutoManual

That's the resistor information, I had a look in my p13-900 last weekend and found I have both resistors so have to put a jumper wire in, which will be fiddly as it's so small..

Prelude danny · Post by **Prelude danny** » Fri Dec 16, 2016 9:35 pm

JEBB4 wrote:http://twiki.pgmfi.org/bin/view.pl/Libr ... AutoManual

That's the resistor information, I had a look in my p13-900 last weekend and found I have both resistors so have to put a jumper wire in, which will be fiddly as it's so small..

Thanks matey

Sent from my E6653 using Tapatalk

Lude Generation

Manual conversion

Re: Manual conversion