wanted front number plate bolts and bumper trim clips

firstlude · Post by **firstlude** » Sun Feb 19, 2017 7:03 pm

as per the title i am in need of some of the bolts that hold the front number plate holder on and some trim clips that secure the front bumper to the bumper frame as per pic

[/URL]

Post by **Drax** » Sun Feb 19, 2017 8:29 pm

How many trim clips you after? I think I may have a few spares of the ones on the right

Pre_luda_Chris · Post by **Pre_luda_Chris** » Sun Feb 19, 2017 8:40 pm

these might help

brand new too

http://www.ebay.co.uk/itm/418Pc-Trim-Cl ... SwoudW-XD~

firstlude · Post by **firstlude** » Sun Feb 19, 2017 8:45 pm

hi drax 5 would be nice

i have looked at them kits but there seems to be alot in there i havent seen on my lude

Pre_luda_Chris · Post by **Pre_luda_Chris** » Sun Feb 19, 2017 8:52 pm

yeah i think its more for a garage, covers a range of hondas maybe.

that or we arent digging deep enough lool

Post by **vanzep** » Sun Feb 19, 2017 10:31 pm

is it the jdm front plate holder your fitting? it just had two normal hex washer bolts holding it on - the bolts should just screw into the two retainer clips at the back

well thats how it fixes to a jdm front bumper not sure if its same for ukdm bumper

u can also use the shorter open ended honda trim clips to hold the bumpers on - they seem to grip better than the longer closed end ones

Post by **Drax** » Sun Feb 19, 2017 10:54 pm

firstlude wrote:hi drax 5 would be nice i have looked at them kits but there seems to be alot in there i havent seen on my lude

i thought i had some but ive just checked and they are a different type

plus i only have about 3/4 of those sorry

firstlude · Post by **firstlude** » Mon Feb 20, 2017 8:16 pm

vanzep wrote:is it the jdm front plate holder your fitting? it just had two normal hex washer bolts holding it on - the bolts should just screw into the two retainer clips at the back well thats how it fixes to a jdm front bumper not sure if its same for ukdm bumper

u can also use the shorter open ended honda trim clips to hold the bumpers on - they seem to grip better than the longer closed end ones

no its for the lude i have just brought the bolts stop the ends of the holder flapping and yeah i did find some of them clips you mention so might go with them