Where can I buy these when every source I try says discontinued. Is there an alternative that I can use. Really cant part with my 1993 2ltr UK spec Prelude for such a silly reason.
Can anyone advise me?
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Power steering pipes
-
Christine McCabe
- Posts: 1
- Joined: Sun Oct 08, 2017 10:53 am
- My Generation: 2G
-
vanzep
- Supporter 2016
- Posts: 7142
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 305 times
- Been thanked: 504 times
most garages should be able to make up new power steering hard lines for you using copper tubing...if its the pipes that go to the power steering cooler at the front of the car thats leaking then ive heard that you can cut this out and just loop it with some suitable rubber hose and clamps:)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
-
OnlineScott560
- Posts: 1407
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 263 times
if its the cooling pipe in front of the rad - i looped it with rubber pipe on my 2.2vti and it never gave me any trouble, including track days.
If its the hydraulic pipes, you might need to remove them and take then to a specialist hydraulic place (pirtek rings a bell) and they can make some new ones up...
If its the hydraulic pipes, you might need to remove them and take then to a specialist hydraulic place (pirtek rings a bell) and they can make some new ones up...
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance