Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

WANTED: 5th gen fog lights wiring
-
- Posts: 410
- Joined: Fri May 22, 2015 7:44 am
- My Generation: 5G
- Been thanked: 1 time
-
- Posts: 1407
- Joined: Sat Aug 31, 2013 4:44 pm
- My Generation: 5G
- Location: Didcot
- Has thanked: 21 times
- Been thanked: 263 times
the front switch is pretty rare - i only ever saw one on ebay USA, and one on here.
i bought this :
https://www.ebay.co.uk/itm/Universal-Fo ... 1a0634e407 (althgouh at the time it came with a square rocker switch which fitted the OE housing acceptably - but not perfect)
and this:
https://www.ebay.co.uk/itm/7-10-13-15-1 ... 2eefbaba24
I wouldnt hold out for the original wiring. Anyone who can wire in an amplifier should be able to sort it out for you. I was able to find a threaded hole in the center of the car by the radiator to earth my JDM fogs to. MY JDM fog housings were a bit old however, and the earthing of the bulb to the housing was poor - so had to polish them up with a dremel to get the working at first (bit of a head scratch moment!).
i bought this :
https://www.ebay.co.uk/itm/Universal-Fo ... 1a0634e407 (althgouh at the time it came with a square rocker switch which fitted the OE housing acceptably - but not perfect)
and this:
https://www.ebay.co.uk/itm/7-10-13-15-1 ... 2eefbaba24
I wouldnt hold out for the original wiring. Anyone who can wire in an amplifier should be able to sort it out for you. I was able to find a threaded hole in the center of the car by the radiator to earth my JDM fogs to. MY JDM fog housings were a bit old however, and the earthing of the bulb to the housing was poor - so had to polish them up with a dremel to get the working at first (bit of a head scratch moment!).
'00 UKDM 2.2VTI H22a8
'21 'e' Advance
'21 'e' Advance
-
- Posts: 706
- Joined: Thu Dec 29, 2016 5:26 pm
- My Generation: 5G
- Been thanked: 84 times
WANTED: 5th gen fog lights wiring
New Kid an Mills are breaking 5th gen at the mo ask them sure one of them has your bits your after