Hello Gents.
Hope everyone is well in this rather crappy weather.
The lude went in for an MOT over the weekend and I have been told I have a rusted fuel line on the near side rear wheel. My uncle could not tell me anymore than that as it goes into a cover and he didn't take the cover off.
Today while using vtec I pulled up into the car park and noticed the fuel was leaking quite badly.
Is it a costly fiddly job? Or something relatively straight forward? I have a full tank of fuel as well which doesn't help lol.
Any advice or help is appreciated.
Regards
Ranj
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Fuel leak
-
- Posts: 609
- Joined: Sun Jan 31, 2016 6:11 pm
- My Generation: 5G
- Been thanked: 8 times
Fuel leak
I came before the chicken.. The argument is now settled!!
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
-
- Posts: 706
- Joined: Thu Dec 29, 2016 5:26 pm
- My Generation: 5G
- Been thanked: 84 times
-
- Posts: 609
- Joined: Sun Jan 31, 2016 6:11 pm
- My Generation: 5G
- Been thanked: 8 times
Cheers Drax.
Will a 12 mm braided hose do? I can pick one up from ebay for 10 quid.
Will a 12 mm braided hose do? I can pick one up from ebay for 10 quid.
I came before the chicken.. The argument is now settled!!
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
-
- Posts: 609
- Joined: Sun Jan 31, 2016 6:11 pm
- My Generation: 5G
- Been thanked: 8 times
Hello gents
Does anyone know the dimensions of the fuel lines for the lude? I am thinking of getting a braided hose but need to know the right size. I couldn't see it in the link that Drax posted.
Ranj
Does anyone know the dimensions of the fuel lines for the lude? I am thinking of getting a braided hose but need to know the right size. I couldn't see it in the link that Drax posted.
Ranj
I came before the chicken.. The argument is now settled!!
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red
-
- Posts: 609
- Joined: Sun Jan 31, 2016 6:11 pm
- My Generation: 5G
- Been thanked: 8 times