WTB 4th gen rear left ABS speed sensor

DanishLuder · Post by **DanishLuder** » Wed Jul 11, 2018 1:13 pm

Well, after lowering the lude on BC coilovers, my ABS and 4WS light has come on, also after excessive rubbing in the wheelarch (this has been fixed).

I'm getting a 4WS error code: 35 and ABS error code: 4,8.
So after surfing the web, I've uncovered that its the Rear left ABS wheel speed sensor that needs changing. I've tested the actual sensor, and it seems to have a loose connection that doesnt seem easily fixable.

So does anyone have one? - Needs to be shipped to Denmark.

Cheers, Ben

DanishLuder · Post by **DanishLuder** » Sun Jul 22, 2018 12:23 pm

Up, no one has something lying around?
Can you use the same ones from the 5th gen?

mart609 · Post by **mart609** » Mon Jul 23, 2018 9:25 am

you can use any 4th gen sensor you just have to take it off the metal mounting bracket and just make sure the wire is long enough.

firstlude · Post by **firstlude** » Mon Jul 23, 2018 10:33 pm

mart609 wrote:you can use any 4th gen sensor you just have to take it off the metal mounting bracket and just make sure the wire is long enough.

you sure can i used a spare osr and fitted to the nsr just a matter of swaping the mounting strips over easy job

DanishLuder · Post by **DanishLuder** » Sun Jan 06, 2019 10:06 am

Up! Anyone has one?
Or maybe a rear right?

Max · Post by **Max** » Sun Jan 06, 2019 10:56 am

I have a rear right for a 5th gen minus the bracket if that's any good to you

DanishLuder · Post by **DanishLuder** » Mon Jan 07, 2019 10:21 pm

Max wrote: ↑
Sun Jan 06, 2019 10:56 am
I have a rear right for a 5th gen minus the bracket if that's any good to you

Damn, sadly not. The 5th gen doesn't look the same as the 4th gen. So I'm not sure they would work.